Vacation, sea, beach - the scorching sun for a long time had set for the sky, a nice gentle breeze brings coolness, and directly overhead scattered myriads of bright stars of different galaxies.This glitter will not see in the city, but here, it seems that only enough to reach out and touch can be Venus.Bring the soothing atmosphere.How do you want to transfer all this with the city, apartment or house, and enjoy every day, without waiting for the next holiday.And something like this can really be done by creating a bedroom, living room, bathroom or kitchen star ceiling with his hands.Embodiments of this invention are numerous: for different purse, wishes and opportunities.There are very simple the inexpensive solutions, and there are complex and costly to flying by comets, supernovas and other special effects.How does all this and realize how much it would cost the creation of a starry sky on the ceiling, describe below.
- How to make a star ceiling using Oracal and luminescent varnish
- How to make a starry sky ceiling based on a tension ceiling
- What ceilings can be used to the starry sky
- stretch ceiling and fluorescent paint
- stretch ceiling, fiber and light engine
- stretch ceiling, fiber optics, light engine and LED
- stretch ceiling, fiber optics, light engine and Swarovski crystals
- stretch ceiling Starry Sky: realizable value
- stretch ceiling Starry Sky: video - example
How to make a star ceilingusing Oracal and luminescent varnish
The easiest and cheapest way to create placers night shining stars on the ceiling without using stretched canvas or false ceiling - it's just to draw their luminous paint or varnish on the main ceiling.This option is particularly relevant in those cases where the ceiling is low, and it is impossible to lower its mounting more serious design.
to day ceiling does not seem so depressingly white, you can create any image .This can be a starry sky, the usual sky with stars peeping or any other non-space theme.Run pattern can be yourself in a graphics editor.Then, contact the company, which are engaged in printing on the film Oracal, which is used in advertising.This film is strong enough, self-adhesive, good color reproduction and easy to install.Since the maximum width of 2 m Oracal, the resulting image will have to be broken down into fragments so that then was not visible seam.
Before you open the sheet, you must perform a test print as the color palette may be different, or you just do not like color reproduction.If you were satisfied with the result, print canvas ceiling and begin preparations for the assembly.
One of the salient features of this technology is that the main ceiling must be perfectly pre align plaster or putty .When the leveling layer is dry, you can start gluing film.Glued it simply: off protection adhesive layer bottom and the film is applied to the base and then rolled and pressed down with something, to remove air bubbles.Dock leaf overlapping better not to accidentally turned white lumens.
The most difficult part of the work is done.Now we have to draw stars that are lit at night.This will require luminescent paint (you can nail) or paint.On the finished ceiling in a chaotic manner or according to a certain pattern, pattern, apply dots and blots of different diameters.In the afternoon we will see only an image that was applied to the film.At night, the points will shine like stars in the sky.
Costs of all materials will be small, only about 80 - 100 USDInstallation costs are not taken into account, since all work can be done independently, inviting a few friends or relatives to help.
How to make a starry sky ceiling based on a tension ceiling
more sophisticated special effects and stars shine, security is not reflective paint, and created with the help of light-conducting filaments, can be implemented using the tension of the web.Why is it when they say "I want to make a ceiling Starry Sky", all imagined it suspended ceiling.But in fact the same can be implemented with a suspended ceiling of plasterboard.In this case, the surface of the sheet or plasterboard are not only the foundation on which the light from the star, but a screen behind which lurk communication.
starry sky on the ceiling value includes the following items:
- cost web.
- printing on canvas, if necessary.
- Installation of fiber-optic strands.The most expensive, so if you perform this work yourself, you can save considerably.
- LED controller if necessary.Too expensive pleasure.
- Creating special effects "Milky Way", "Flight of the comet" and others.
- Installation of suspended ceilings.
not necessary to use all of the above.Much of the work can be done by yourself, then you have to pay only for the materials and devices.Next, we describe the different ways how you can make a ceiling starry sky with their hands.
What ceilings can be used to the starry sky
Stretch ceilings made of PVC films are used more often than others.Mainly due to the fact that they are lighter and higher quality printing is applied to water-based paints and airbrush.The texture is suitable for both glossy and matte film.The most popular are satin and matte paintings with application of space objects with the help of photo printing.
Fabric ceilings different manufacturers such as Deskor and clips, are convenient in that they applied to the image can be used as a template to remove the optical fiber in the right place.Needless patterning starry sky made with the help of interior print.A nice bonus is that you can put on the canvas an image that was photographed real telescope.Also indisputable advantage of the tissue fabric - no need to warm up before installation.
stretch ceiling and fluorescent paint
This method is an analogue of the first, which was used Oracal and fluorescent paint.The only difference is that instead of bonding the film to the surface of the ceiling is necessary to pull the fabric to the frame.
Align ceiling is not necessary, but the mounting tension ceiling will have to retreat at least 3 cm down.On the canvas can be depicted any image, not necessarily the starry sky.This may be the ocean, nature, ordinary sky with clouds.But fluorescent paint applied on top of a chaotic dots and blots that will glow at night like stars.
But you can do otherwise.Apply a canvas picture of the sky, and then all the stars and space objects bright colors to paint fluorescent paint.Then it turns out that painted the stars shine.
Mounting tension ceiling :
- Using a level, find the lowest corner of the room, back down from the topmost point of 3cm down and put a mark.
- We transfer a mark on the rest of the corners and the walls.On the perimeter repel zero and check it horizontal.
- On line marked on the walls fasten profile / baguette for ceilings.Secured by screws and dowels in increments of 15 cm.
extremely important to precisely and accurately dock sections together in the corners, so the angles are measured protractor, and then divide the resulting number in half and trimmed the edge moldings strictly under half the size of the angle.
- heat gun heats the room to 40 - 50 ° C.
- After warming the room unwound canvas stretch ceiling made of PVC film.
- film Warms up to 60 ° C.
- establish one corner of the canvas prints, snapping a harpoon in a baguette, and stretch the fabric diagonally.
- Fix the diagonally opposite corner.
- then stretch the fabric and fasten the other nearest corner and behind the counter.
- When the corners are filled, stretched and anchoring side of the web in a baguette.To do this, we use the building trowel vdevaem his harpoon into the web and is pushed into a baguette.
When the suspended ceiling is fixed, apply paint stars, planets, galaxies.The points can be put in a chaotic manner, and can be prepared in advance a pattern, attach it to the surface of the canvas and using as a template, mark fluorescent paint required elements.
Day traces of paint will not be noticeable, but at dusk and in the dark ceiling will shine star.
stretch ceiling, fiber and light engine
The implementation of this method is much more difficult previous, installation is very time-consuming and responsible, and cost of materials is great.When ordering the installation of a stretch ceiling starry sky of this technology in the organization of the profile, it will cost 5 times more expensive than material.
or projector light engine will be the light source, the projector box must be hidden behind a tension ceiling or in a niche of the drywall, behind the cupboard in a closet or even in another room.If the projector is installed behind stretched canvas, the light rays should be directed parallel and perpendicular to the light canvas fibers, ie,fiber strands.
Halogen projectors equipped with a halogen lamp of 50 to 100 watts of power.The service life of such a lamp is very small 3500 - 4000 hours, so the projector be installed in an easily accessible place to easily replace the lamp.The connection head can be inserted up to 765 strands of 0.75 mm in diameter.With halogen projector can create an even illumination of the end portions of fiber strands and create a flickering effect, which is achieved by a perforated filter.There are two types of halogen projectors: monochrome - only illuminated with white light, and color filter - illuminated by several colors.
LED projectors are monochrome and full-color, gradually changes color and static burning.LED life of about 50,000 hours, which is much greater than that of halogen.There are models of LED projectors, which can connect two sets of fibers "starry sky", one will blink and another - just to burn.
more projectors to create special effects are not part of the mounting structure.Most often, this laser projectors that set separately.
What special effects can be done with a laser projector :
- Falling stars.
- flying comet.
- rotation of the galaxy.
- supernova explosion.Showing
- certain constellations.
- rotation of the planet with their encircling rings (Saturn, for example).
- Northern Lights.
Fiber - another important element of the system.The fiber bundle is connected to a light source or projector.The ends of the fibers are threaded into the back side of the web of stretch ceiling.To create the effect of a starry sky in 1 m2 of fabric made up of 100 - 150 holes into which threaded through the thread.Although the number of holes varies depending on the wishes of the owner and the idea that you want to translate.Each hole may be from 1 to 700 units filaments, their number determines the brightness of stars or other object in space.For example, the star may be 1, 3, 15 fibers.Equally important is the diameter of each strand.
Once chosen projector, bought fiber, suspended ceiling, you can install.
Installation of a stretch ceiling Starry Sky :
- First install the projector in a convenient location.For example, for plasterboard frame, framing the suspended ceiling (for the two-level ceilings).The drywall provides a hatch through which you can take out the projector.
- Then mark up the space for a baguette and fasten it below the ceiling of 15 cm.
- slightly above the fastener profile stretch the net.You can use the fishing or masking.The grid should be one plane to the ceiling and to be slightly higher next stretch ceiling.The grid cells must be sufficiently small to make it comfortably through them to reach the thread fiber.Looking to the future image of the sky through the cell stretch yarn, like scheduling, which will be located or that space objects.
- Then warm up the room, then canvas, anchoring one corner.Warms up diagonally.We carry out in the web holes fiber strands.You can use a soldering iron with a fine needle or a needle on the end.The resulting hole extends one or more fiber optic strands, as suggested by the drawing.The filaments are stretched at least 15 cm, but it is possible that they are hanging and longer.
- The web is then fastened at the corners and continue to make the holes and insert the fiber.
- When all fibers are threaded through the fabric, finally fasten it.
Important!Pulling the thread too much, so that they are stretched, it is impossible.Must be made slack to the fiber bundle can be easily removed from the projector and no damage.Bend the fiber must also be careful not more than 7.5 mm in diameter (for threads 0.75 mm).
- When the suspended ceiling is installed, you can fix all the threads in their holes.For this purpose, fast setting adhesive.But this is not necessary.
- filament fiber is then cut off flush with the canvas or 2 mm below.
fiber optic strands with different diameters can be used.For example, one pair of large star m2 to 2 mm pieces of 10 mm to 1 and all other 0.75 mm.
Instead, you can create a grid structure of any sheet material, even drywall.But in this case the installation of complicated due to the complexity of making holes in the drywall.
second variant highlighting tension ceiling : do not pass through the thread through the fabric, and secure them from the inside ends of the fabric.Radiance will not be as bright, but rather scattered, but the surface of the fabric will not be affected, and in the afternoon will not be seen protruding strands.For greater brightness can be set yarn is not 0.75 mm, 1 - 2 mm.Or mounted on the ends of the LEDs, but that's another way.
Installation of the sky without threading fiber through the suspended ceiling difficult previous.Skilled craftsmen have come up with a clever way.They perform false ceiling of a tension fabric, drywall or other sheet material, it is performed in the hole, pulled thread.Next to the screw hole is fixed, to which is tied a thread or a bundle of threads.Then, when the suspended ceiling is installed, the ends of the filaments will just rest on the web, but can not be displaced.
stretch ceiling, fiber optics, light engine and LED
This method is a logical continuation of the previous one.In addition to all points on the ends of the installation of fiber optic strands attached LEDs of different power.This is especially true for the isolation of large shiny objects: supernovae, comets, and others. The glow turns more intense and sharp.Wires dangling from the front side of the web with respect to the LEDs look aesthetically pleasing.
If you use the technology installation without threading through the fabric fibers, the lights dimmed and get distracted, but in any case, more vivid than those without LEDs.
can also use controllers for RGB LED strands to change the colors and create special effects.etc.
Posted by in Ceilings