smooth ceiling is the dream of every owner.Make this a perfect horizontal surface is possible by means of a tension ceiling.This fabric will hide any seams and defects base plates to any room.Another thing is that the walls, which are adjacent to a surface can be, to put it mildly, not so ideal.And between them and the surface of the ceiling there is this ugly gap!Oh, and here must insert masking tape tension ceiling.Why you should choose it, rather than ceiling moldings?
- The need for installation of masking tape Masking tape
- against the ceiling moldings
- Advantages decorative masking tape
- Installing decorative masking tape
The need for installation of masking tape
The final event of the tension mounting system - a PerimeterMount decorative masking tape, which provides camouflage butt gaps between the wall and ceiling structures.Masking tape placed in the opening between the mounting profile and the wall without glue.
But why is it that there is such a gap?You are ashamed to think, if not done properly Installation of suspended ceilings.However, the reason is simple: stretched canvas is attached not to the walls, and to the fixed profile.Inside the profile has a cavity into which is inserted a special shovel harpoon that is a rigid ceiling edging.
After installation, just open and remain a technological hole in the profile: tensioning the canvas after pulled close to his neighbor from the edge of the center of the room.It is here and inserted masking tape with some effort.
Masking tape against the ceiling moldings
main purpose for which the set of decorative ribbons for suspended ceilings - Hiding untidy to the eye of the gap at the wall.However, do you know another method to mask all the flaws of the ceiling junction with walls - ceiling moldings.Of course, if you choose it, it is necessary to get acquainted with the peculiarities of his installation:
- plinth mounted to the wall only.They can not be glued directly to a stretch ceiling: painting will wave and drafts vibrating film ceiling will undermine glue joints skirting.In addition, it is unknown how a thin film will react to the adhesive composition.
- recommended to choose a sticker under the ceiling moldings to the wall with a maximum width pad.The reason has already been mentioned: to glue baseboards have only to one surface.
- If you choose instead of a skirting molding, the problems with the label be reduced to a minimum, because the molding was originally intended solely for mounting to the wall.
ceiling moldings are perfectly combined with stretched canvas.But their installation is quite specific.A masking tape has one big advantage over the ceiling moldings: tape decorative stretch ceiling mounted reversible.Situations when you have to dismantle the suspended ceiling is not so little as it may seem at first glance.
The list of reasons dismantling stretched canvas - fault hidden communication required replacement of pipes, flooding the neighbors from above, circuit wiring and other problems.In short, the ceiling sooner or later have to be removed and installed again.Harpoon mounting PVC film technology allows you to do it quickly and without any problems.Masking tape for easy to pull out of the ceiling profile and inserted back into place.
But plinth are glued against this background that a major drawback: when they have to dismantle and tear simply throw it away, and area under the sticker will not be smooth.The tape is much narrower ceiling moldings.Even if you choose a contrasting color, then the tape will reduce the visible area of the ceiling slightly.But the area of the ceiling and floor person estimates the size of the room.
Advantages masking tape decorative
main advantage of masking tape to stretch ceiling is shown and the replacement of wallpaper.If you wish to change the paint or wallpaper on the walls of the tape is easy to dismantle and procedure established in its place after the completion of finishing works.And this procedure you can carry out several times.Masking tape perfectly hides deformed areas on the walls, unrepaired or unavoidable defects in the walls near the ceiling.This is especially true when pasting wallpaper surface textile or vinyl series.
inlays is also used for masking joints between several stretched canvas.This will help give a complete roof system, optical appearance.Thanks to the plasticity of masking tape to a stretch ceiling is possible to use a plug in the case of complex shape, which is a smooth undulations.At the request of the owners of the masking tape can be safely wash, which confirms the high quality of a thin border.
Installing decorative masking tape
Masking tape for suspended ceilings can have several forms that distinguishable from each other - L-shaped, T-shaped and F-shaped.L-shaped masking tape from the first type differs only way of fasteners.There is no longer any fundamental differences.T-Tape has a different look, her two extreme sides of the frame in contact with the ceiling and the wall, T-tape is inserted into the fixture that is available on the frame, and the other side rests on the wall at a certain angle.F-shaped masking tape is used with plastic mounting profiles.
most universal is a T-shaped masking tape to the ceiling.Due to its flexibility and high degree of flexibility, you can use these caps and cardboard-gypsum ceilings.This is true when you hide the transition to multi-level ceilings with irregular shapes - circular or wavy.Besides universal L-shaped strip (line trim) can be used with any kind of profile.
Masking tape to hide the transitions operate mainly of polymeric materials, and therefore offers great flexibility result.With the help of dyes can achieve maximum effect decoration: the market offers a range of any colors and gradations, even mixed colors of the rainbow.This allows you to make a reality of any design project perfectly and harmoniously complete the interior of the room.
When choosing decorative ribbon for suspended ceilings is recommended to pay attention to its color.Selection plugs typically comes down to one of three options.
- tape that has the color of a stretch ceiling, the apparent visual part of the ceiling makes a little more.
- tape having the same color tone walls, makes the wall in turn, appear higher.
- tape in a contrasting color creates both surfaces clear visual boundary ceiling.Looks nice, but only if the ideal geometry of the walls: a contrasting border underline any of their curves.
terms of installation techniques of masking tape for ceilings, there is no difference for the types of plugs.In all cases the tape must push with moderate force into the groove.These special place in the construction of a stretch ceiling that used to fix the belt, called the slot connectors.When mounting the masking tape you can not only get rid of the technical gap between the wall and stretched canvas, but also you will avoid accumulation of dirt in the gap.
Mount decorative tape tension ceiling around the perimeter of the room.In operation, there is no need to use adhesives.To seal the wall exactly watched the tape should be installed at an angle less than 90 degrees, the additional pressure that is on the wall, helps to increase the strength of the assembly.If you have the need, you can remove the tape to be reused by inserting edging into place.
thus masking tape to install optional, but we strongly recommend it!To refuse it is impractical for reasons of cost.The same applies to the time savings - edging tape can be put on for a couple of minutes, which is almost no effect on the time of installation of stretch fabric.So it makes sense to order the suspended ceiling with a decorative insert, so that it looks holistically and beautiful.