Toilet - obviously not the place where we just do that and that considers the ceiling.We pay attention to it only at the moment when we go into the room.All the rest of the time we have to wonder quite different matter.However, refer to finishing the ceiling in the bathroom too, should not disregard.If we put things marafet, then everywhere.Moreover, most often it is in every respect an important space is so small that the walls and floor, and ceiling are perceived it as a whole.Therefore, it is necessary to pay attention to all the details.The abundance of finishing materials on the market allows you to choose the best option, with which you can decorate the ceiling in the bathroom.The color, texture and design should be podobranny tasteful decoration so the toilet to remind the Hermitage and not be distracted from the main case.All work on the decoration of the ceiling, you can easily do yourself, without the help of specialists and not spend
- requirements to the ceiling in the bathroom
- How to choose the color of the ceiling in the bathroom
- How to whitewash the ceiling in the bathroom
- How to paint the ceiling in the bathroom
- How to paste over the ceiling in the bathroom tiles or panels
- PVC panels
- Cork panel
- Foam tiles
- How to make a plastic ceiling in the toilet
- How to make a false ceiling in the toilet
- Cassette ceiling in the toilet
- Rack ceiling in the toilet
- plasterboard in the toilet
- How to make a suspended ceiling
requirements to the ceiling in the bathroom
Toilet - in every room specific, there are risers pipes, sewer least, there is the toilet and sometimes boiler.Therefore, to finish the bathroom must meet certain requirements.After the pipe at any time may be worn out, there will be leakage, all of which should go with minimal consequences for the finishing materials.
- The ceiling in the bathroom should not be afraid of condensate, it should not form the mold.
- Finishing the ceiling should not interfere with access to the pipe.
- design ceiling in the bathroom should conceal the minimum space.
- ceiling should be combined with walls and floors.
choosing what to do in the bathroom ceiling, should take into account all the requirements and pay attention to the ways that will give maximum visibility to the pipe, to look aesthetically pleasing, the minimum height of the room and pick up will make water-resistant ceiling.
How to choose the color of the ceiling in the bathroom
choice of color for the ceiling in the bathroom all depends on two factors - the height of the room and walls.
If the room is very low , the ceiling should be made lighter than the walls.Suit all pastel colors, light green, light blue, light pink.Also, to increase the visual space You can use the mirror panels, glossy, glass or silver / gold / chrome color.The combination of matte and silver hues also allows you to expand the boundaries.
If the room contrary - too high compared to the total area, the ceiling must be visually approximated.To do this, fit dark colors - purple, red, blue, gold the same, but with the proviso that wall decoration is bright.Lighting in this case should be positioned on the wall and to direct them to the objects located below the ceiling to switch attention to them.
not on the ceiling in the bathroom to do artistic painting or printing with the image of the city at night, in public places such delights can and will make a favorable impression, and in the home environment will be a distraction.
How to whitewash the ceiling in the bathroom
Whitewashing - the classic version of finishing the ceiling.He has plenty of advantages - speed of execution, aesthetics, nice white color and texture.Lime wash is not afraid of mold, allows the surface to "breathe".In case of flooding, it is wet, but whether it is so much a disadvantage?But immediately clear where and where flows, excellent access to the pipes.Whitewash the ceiling again takes less than 15 minutes.
to whitewash the ceiling, you must :
- Align ceiling surface using putty.The need for carrying out this type of work is referred to the shortcomings of whitewashing, but let's look a little more detail.The ceiling in the bathroom - is the surface of a slab without joints.In contrast to the ceilings in the rooms where the difference between the plates can reach 4 - 5 cm. Align the surface of one plate is reduced to a simple Shpatlevanie.
- shpatlevanija need to finish putty, two types of spatulas, mixing well with a drill and mixing attachment.
- prepared solution putty dries up pretty quickly, but given the fact that the room is very small, one batch will be enough to zashpatlevat entire ceiling.Gaining putty on a spatula and spend it on the ceiling sharp semicircular motion, spreading the solution.To remove excess perform movement in a perpendicular direction.
- When the putty is applied evenly as possible, leave it to dry for a day.The next day will be overwritten and sanded it, cutting off the small flaws.
- Cooking lime wash, dip into her bludgeon and applied to the surface of the ceiling.We try not to leave nepromazannyh places.Repeat this procedure several times.
whitewash When dry, it will become a bright white.Further it does not require any special care.It does not accumulate dust.Only in the event of flooding, when it may appear red spots, only then it will be necessary to update the cover.
How to paint the ceiling in the bathroom
One of the ways to make the ceiling in the bathroom waterproof - is paint it.To do this, pick up the paint designed for use in high humidity conditions.This category includes oil paints , based latex , silicone , acrylic , some positions waterborne paints or water-based paints.
colossal range of colors and modern colors allow to pick the perfect option, combined with the color of the walls.For painting the ceiling in the bathroom will also have its surface leveled with putty, as is the case with whitewash.After drying, the putty composition is applied by means of paint roller.
It is advisable to paint the ceiling in several layers, 3 - 4. This will not only make color saturated, but also the maximum ceiling to protect from moisture.
on the surface of the ceiling painted in a high humidity will form droplets accumulated condensate.No harm, they will not do.They can just wipe with a cloth, and it is possible to wait until the water dries itself if ventilation is good enough.
How to paste over the ceiling in the bathroom tiles or panels
Pasting the ceiling tile allows you to make a beautiful finish without losing the height of the room.The surface will waterproof.A very important caveat - the size of the tiles must be chosen so that it does not crippled the already small room.It should either be very large to cover the entire area of 4 tiles, or vice versa - small enough, it will expand the visual border.
PVC tiles or panels are glued directly to the ceiling without additional fastening.They are lightweight, easy to install, cheap.This method of finishing the ceiling less of the same plastic panels.The only drawback - they can deform and come off.Also, low-quality plastic can change the color, for example, turn yellow, but still uneven.
Bonding PVC tiles on the ceiling:
- The surface gruntuem waterproof glue.
- Then apply glue to the back of the tile or panel at least 6 - 9 points.
- We put the panel to the ceiling and pressed.
- following tiles have close to the first, leaving no gaps.Incidentally, PVC tile can be glued next to the hot water pipes.
For more on the aesthetic contour of the ceiling can be glued ceiling moldings.
cork boards and panels - natural finishing option, which also allows soundproof room.However, such panels always sold in dark colors, so they can be used only by owners of premises with high ceilings.Moreover, the price of the cork panels is rather high.They are glued absolutely identical manner.
tile of expanded polystyrene (Styrofoam) is sometimes so intricate that resembles stucco.A small selection of colors, mostly such plates are white.But a variety of embossed patterns is striking.Styrofoam plates are lightweight, quick stick, but they have three drawbacks - dust accumulates over time zhelteeyut, easily broken during installation.
How to make a plastic ceiling in the toilet
plastic ceiling panels can be installed quickly, are easy to clean and are not afraid of moisture, have a wide color gamut.Installation of plastic panels on the ceiling reduces its height by 3 - 4 cm. Since this is actually a way to finish almost suspended structures, there are two ways how to deal with the trumpets.The first - cut holes for pipes in the panels and panels mounted to the entire area of the premises.The second option - to make a pipe separate box - wardrobe.And then install the panels will be made on the remaining space with trimming the length of the panel.
plastic panels can be matched to the color of the walls, install mirror panels or panels-chameleons, matte, glossy, embossed, raised, 3 D panels, rough - for every taste.
PVC Ceiling panels represent two plates between which are sandwiched stiffeners.By themselves, the panel is not enough strong material, it's easy to break or damage the other way.The strength of these panels is determined quantity, quality and durability of the stiffeners.PVC panels are seamless , ieat their installation remains slits and gaps, relief , i.e.formed seam between panels, reminiscent of "bunk" and panels with rustication , seam after installation resembles a seam between panels overlap is small and neat.These differences can be seen demonstrating a plastic ceiling in the bathroom photo.
Installation of plastic ceiling panels:
- crate nailed on the ceiling of the longitudinal bars.You can use pieces of wood 30x30 mm, pre-treating them with an antiseptic.Spacing bars 40 - 50 cm. Fix the beams to the ceiling by anchor 70 mm long.
- If you plan to install the lights in the panels, then at this stage, paving the electrical cable to their location.
- start the installation from a special initial profile "start" and "finish."Then measure the distance between them, it will be the length of the panel.
- Cut the panel to your desired size of a normal hacksaw.
- Set up panel in the side profile, promote start-up profile, in which we fix.
- Attach the panel to the frame using screws or a building stapler, twisting in the groove.
- next panel factory with side profile, moves to the first panel, insert the spike into the slot and snap.Also twirl screw into the groove of the panel, fixed to the crate.
- Repeat procedure for all panels.The latter should enter the groove or a cut edge, if it was rough, finishing in side profile.
Hole Light can be cut using a drill with a crown, is inserted into the lamp first, then mounted panel.
width plastic panels for the ceiling should be chosen with the wall decoration.For example, if the walls of the toilet tiles, the width of the panels should correspond to the width of the tile.
How to make a false ceiling in the toilet
Suspended ceiling in the bathroom started to do recently.Their advantage is the beauty and attractiveness, resistance to moisture, the ability to hide all the flaws and irregularities basic ceiling, durability, easy assembly and disassembly at the needs.The disadvantage is only one - the deteriorating access to the pipes.This nuance is necessary to think carefully and choose only those hung ceiling, which can be easily disassemble and reassemble again.
Cassette ceiling in the toilet
in a very small closet, this type of ceiling will look ugly.Do not save even a diagonal arrangement of the guide which visually expand the space.But in the medium and large bathrooms square coffered ceiling arrangement is advantageous.Also important is the height of the toilet if the ceilings are high, it is safe to do a cassette ceiling, if low - it is impossible.
coffered ceiling are of two types: open harness and closed .For example, mirrored and glass ceiling mounted on an open system, as the French aluminum ceilings - to close.These systems are made different panels.To open the system panel with a smooth edge or with a step and a closed - panels with curved edges that are easy to insert into the holes in the mounting profile.
for toilets with low ceilings better suited aluminum cassette ceilings with a closed system.Apart from the fact that they are moisture resistant, can be painted in different colors, easy to clean, relatively cheap, such ceilings also allow easy access to the main ceiling or pipes.Simply remove one or two panels, perform repairs, then insert the panels back.
Cassette ceiling in the bathroom with their hands:
- do the drawings, coffered ceiling of the closed type with precise dimensions.This will facilitate further assembly and will help to place the panel.
- Mark up the ceiling, put on the walls of the zero level of the ceiling.It should be 150 mm below the main ceiling.
- at zero level attached to the wall corner profile.Zasverlivaem in the walls of the holes, insert the dowels, then applied profile and twists screws.Step between the plugs must be at least 40 cm.
- over the corner profile to make notes, which will be mounted basic guide.We stretch between points on opposite walls of the cord or thread.Focusing on the cords, make notes on the ceiling, which must be placed suspension.
- fix to ceiling pendants with anchors 13 mm.
- establishes the basic guide.Step between the guides must be equal to the width of the panel.They relied on angle section, then align strictly on a cord and fasten to the suspension.Strictly control the location of their flat in the horizontal plane.
- attached to the main guiding decorative panels.Insert the edge panels into the slots on the mounting profiles and snap them to the end.Move the panel to the edge of the structure.Repeat this procedure for each panel.
- If you need to install the panel smaller, then clipped the bar and laid with the cut edge on the corner profile.This profile contains special elements by bending that can securely attach the panel.
Installation coffered ceiling with an open system is slightly different, in addition to the basic guide, you must install the cross rails and strictly align between the angles of 90 °.In the resulting cells are inserted panel just laid on the edge profiles.