Perhaps it is no secret that during the operation of wooden windows wood dries up, which is why there are cracks and crevices in frames, expanding the gap between the glass and the glazing bead that he is being held,and also decreases the fit wings to the frame.This is particularly felt with the onset of cold weather, when the wind and the mournful whistling through the cracks of the window.In principle, there are situations where this can be tolerated and does not even notice.When the house "stoked" is so strong that we have to open the door on the Non-Glazed balcony, that was not too hot in the room, while the presence of cracks in the frames plays even on hand.But what about those who are not so lucky, whose home is not as "hot" heated, and plays an important role in energy saving?In this article we will describe some of the most common ways of how to properly insulate the window, so that through them did not leave the lion's share of heat.
- How to insulate old windows Winterizing windows
- newspapers and paper strips
- Winterizing windows wool and fabric strips
- Winterizing windows with foam and duct tape
- Sealing cracks in the windows of paraffin
- Winterizing windows on the Swedish technology
- Winterizing windows Heat film
- Warming window openings
- Video: how to insulate windows
To begin council has no direct relationship to the windows, but plays an important role in the proper distribution of heat in the room.All houses radiators under windows.If you close the curtains radiators, hot air rising up from them, will be safely blown out windows in the gap and not performing its function of heating the room.Therefore important to leave open the radiators.
old windows How to insulate
Ways insulation of old wooden windows are countless.There really invent "who on that much", using the simplest means available.Among them are temporary measures, which removed the last traces with the onset of sustained heat during routine cleaning and window cleaning.But there are methods that can ensure the integrity of the windows for a few years.The following are only the most popular ones.
Winterizing windows with newspapers and paper strips
Very old proven method.Our grandfathers, performing insulation windows with their hands, using only the most accessible and cheap means.To seal cracks to use old newspapers that mascerated water.The resulting mass fills the space between the glass and shtapikami other slot.Sometimes the newspaper first curled into tubes, only then dipped in water and pushed into the slot.On top of it all the joints with glass frames and sashes to the base frame sizing strips of paper.For this soap is diluted to liquid consistency, and the resulting solution was coated on a strip of paper.They are then glued into place quickly.
This method is good, but in the spring of all this "beauty" is necessary to tear off.Here you can encounter such a problem: with the paper will tear off the paint.In addition, the remnants of paper and newspapers is quite easy to wash and remove without damaging the coating frames.That is why there was another way.
Winterizing windows wool and fabric strips
Winterizing windows cotton has replaced newspapers.Technical wool is pushed into all the gaps, and top sealed by strips of cloth, soaped, as in the previous method.Air bubbles are wool heat insulator.At the same time it can be easily pulled out.A strip of fabric to tear off from the frame, leaving no trace and without damaging the paintwork.
Such a process, and today a place to be, we should not treat it with skepticism.It is cheaper and performs its functions "Hurrah."Vata - an indispensable material.But instead of strips of fabric is quite possible to use modern tape for sealing windows, which are a type of paper tape.After removal they leave no trace.
Winterizing windows with foam and duct tape
Foam is good, if the task is how to effectively insulate the windows, in which large cracks in the arches.In other words, opening shutters are so dried up that are not flush to the frames.There will not get off easy wool.Along the perimeter of the leaflets glued foam which provides sealing the windows.By the way, earlier, when the market was not yet foam with adhesive side, his small frame nailed to the studs.Foam can last a couple of years, then it will begin to break or deform.Above the frame are sealed with tape, the same as in the previous process, i.e.paper.Spring will have to remove the adhesive tape and foam can be left.
Sealing cracks in the windows of paraffin
Another method that applies only to seal small cracks in the frames.Paraffin is melted and drawn into a syringe and filled the gap.In the case of oversized slots can use a clothesline or other cord.It is pushed into the slot, and then embedded in paraffin.As you know, this is not enough for one season.
Winterizing windows on the Swedish technology
very popular in recent years and the way to advertise.In fact, the technology was not invented by the Swedes.It received its name "in honor" of the material, which it uses - EuroStrip, he actually invented in Sweden.And the method is called "technology grooved sealing the windows."
The main difference between the "Swedish technology" that is not even warming "in the winter", and partial reconstruction of the windows.After her window can be freely open during the cold season (they are sealed), and "warming" will last 15 - 20 years.
Repairing small cracks in the frames or between the glass and shtapikami performed using a sealant.The windows must be pre-washed and dried.And the process of applying the sealant should be carried out at a positive temperature of +5 ° C to +40 ° C.
nozzle on the cartridge with the sealant must be carefully cut along the marked line, then put on a special building gun.With it you can easily apply the composition in hard to reach places, evenly distributing it.If sealant has got the frame or sill accident, it is removed with a cloth soaked in gasoline.Since glass is more convenient to remove the sealant after it dries, simply skovyrnuv his knife.
to seal the porch, a special seal for windows made of silicone rubber having a tubular profile.Manufacturers of sealing assure that he is not afraid of colors, changes in temperature and dirt.The diameter of the tubes and the structure is different, so you need to pick up the seal individually to the size of the slots.Marking seal is "E" (K-profile) - for closing gaps 2 - 3 and 5 mm;"P" - for a gap of 3 - 5 mm;«D» - cover 3 - 7 mm.To determine the size of the clearance between the frame, can be clamped between the sash and frame a piece of clay, wrapped in cellophane.
seal installation works are in fact partial restoration, which is best left to professionals.Moreover, if the frame is not in the best condition, the geometry of the window is broken, the tree rassohlos or partially rotten, the repair can "fly into a lot of money."The technology is designed for the window, followed by carefully tended and kept them in good condition.Otherwise, the insulation on the Swedish technology can do in as much as there are new plastic windows with double glazed windows.
to start all shutters are removed from their hinges.
Next on the perimeter of the frame groove cutter is selected.
It rolled and glued seal, so that it does not slip and falls out during operation.Then the flap back hung on hinges.Here again, if the window is old, you may need replacement of fittings or even the alignment geometry window.
With due respect to the seal will last 10 to 20 years.And during this time, you can save up money and new windows, you can also wooden, only modern - fiberglass.
Winterizing windows Heat film
a relative novelty was the use of heat-films.They allow light into the room, but not "released" from it infrared thus keeping patient warm.Such a film has two sides, one - with a metallic sheen, conducting, the other - no.When sticking the film to the glass absolutely necessary to make sure that it is "looking" at the side of the street is the metal - the whole point.
Hang be overlapping in the frame, secure with tape.If the paste gently, its presence would not even be seen.
Heat film can be pasted on the plastic box.
Warming window openings
One of the most important points.And that can be a window seal, and the gap in the floor between the frame and arm slope sill or as we like to keep the builders may not be noticed.
most common method of caulking between the frame and the window opening is blowing out with foam.And effectiveness, and little hassle.Only now, after drying it will be necessary to trim the excess and somehow patch up the "beauty."
for sealing gaps can use putty prepared independently.It is necessary to take a plaster and chalk and mix them 2: 1 by adding water.The resulting putty repaired all the cracks.Its color will not stand out from the window as foam.
All the methods described above are designed for thermal insulation of wooden windows.It's hard to believe, but they say that sometimes plastic windows also require insulation.Most likely, such a need arises due to improper exploitation or "hack-work" installation.The reason may also be a poor quality of the windows.In case of failure of the seal, it is necessary simply replaced.If the problem is more serious, such as changing the geometry of windows, shutters or sagging of the poor performance of hardware, is to turn to professionals to produce and repair.
Video: how to insulate windows