tasteful architectural decoration is able to transform the interior of the premises, give it elegance and turn an ordinary living room in luxury apartments.With stucco on the walls of the room filled with unique shades of emotions - from classical rigor and clarity to the regal splendor.Choosing to design her apartment like decorative elements, should be guided by your taste and demands made in this regard the selected style interior.Fragments ornaments and moldings in any case, must be appropriate.
- story stucco
- Modern trends
- plaster moldings Polyurethane moldings
- Making stucco
- sketch to create jewelry
- Manufacturing products
- Installation of stucco products
the first time in our country learned about the stucco on the turn of the 17th - 18th centuries.This decor quite quickly gained unprecedented popularity among architects because it is due to the material used for the better was different from t
first moldings made of expensive soft stone by means of traditional woodcarving.But soon replaced by cheaper materials - stucco and plaster.For the manufacture of such articles was a mixture of clay or gypsum marble grit.It is important to note that it is always done manually stucco, which gave each fragment special spirit of originality and talent reflected wizard.
first use of gypsum in the stucco decoration of the interior dates from the Baroque period.This style is characterized by its own quirkiness bends.And this is the best decor softened roundness of its form straight lines.In the Baroque period the most common "sculpted" the image of angels and cupids, bouquets, garlands of leaves, fruit and fruit.In the twilight of the 18th century, a fabulous frenzy and splendor of the Baroque gave way to the strict classicism.
stucco elements in classical style emphasizes all the horizontal and vertical interior.By virtue of brevity and symmetry of ornaments classicism, relief stucco decoration contrasted with smooth surfaces and regular geometric shapes.Since the beginning of the 19th century came a new Russian Empire style, and increased attention to military issues.The decor of the most frequently used laurel wreaths, guns and torches.With the advent of Art Nouveau stucco refill curved lines, very simple and concise.
Fashion today in itself combines elements of Baroque and Art Nouveau decor, classical and modern styles, for example, moldings 3d.Not dried up demand for moldings, as in the past, these expensive jewelry lovers prized architectural delights.When it comes to interior decorations, in stucco is almost no competition.Stucco gives the interior decoration of rooms an extra kick that is comparable to the beauty of the ancient theater.
Fretwork is now a relief decoration of facades and interior space.The assortment is diverse enough: columns, cornices, pilasters, ceiling rosettes, brackets, dome, sockets and more.Stucco currently serves the most common type of decor, allows you to copy multiple original model.
usually for centuries for the manufacture of stucco plaster used.Due to the present plasticizing components manufactured plaster moldings favorably resistance to mechanical damage and significant strength.Excellent physical properties of gypsum are complemented aesthetic characteristics.The advantage of the plaster decoration lies in the fact that the plaster - is a natural material.
Gypsum resistant to mold, its surface is not a favorable environment for living organisms.But like stucco there are several disadvantages, the main of which - heavy weight, which leads to some problems during installation.Sometimes supporting structures can not withstand the weight of the product.
Fretwork Polyurethane rivalry of gypsum products.Polyurethane is resistant to the harmful effects of water and temperature variations, it is a very light material that allows mounting of polyurethane moldings on the ceiling with the help of adhesive mixtures.Thanks to the plasticity of polyurethane moldings can be made of any complexity.And when he wants to portray something very unusual, something you can easily do it.
Due to the natural properties of the polyurethane hard to melt.Accordingly, polyurethane products can be placed in close proximity to the hot lamps.That is why the moldings EVROPLAST received in the interior of apartments widespread.In addition, polyurethane unlike plaster is easy to paint, substantially expanding design possibilities.
You already know that the stucco is capable of the best way to transform the living room.If you wish, you can buy moldings.And you can dream up and make a product with their own hands.To make your own ornament from plaster it is recommended to pay attention to a few basic steps in the procedure, following which turn out to produce a lot of interesting things for your interior.
sketch to create jewelry
Technology of stucco includes sequential execution of multiple tasks and begin production of the product consists of creating a model from clay ornaments.Models are needed to in the future it cast plaster decoration.Plasticine model is slightly larger than the expected thing.The use of clay allows you to change the shape of things any number of times until you reach what you need.
After production models need to perform actions in a sequence.Spread the plaster until the consistency of sour cream, then you need to apply the first coat on the sketch with a brush to all carefully deepening fluff.The second and other layers made of gypsum applied with a spatula.The entire mass leave to dry for one hour, then remove the clay model form.
If the subject has impressive dimensions, the first layer of plaster lay reinforcement of copper mesh.The final step in creating molds for stucco coating appears sketch shellac, or furniture with varnish on the inside.This must be done so that when casting plaster products are not molested.
When the sketch is ready for molding, it is possible to begin the process of manufacturing the product.First, prepare the material, i.e. gypsum dilute to a consistency that is similar to the consistency of sour cream.Pour the material should be as follows: first fill in the form of a small amount of gypsum and brush spread in small depressions.In the allocation structure, make sure that it did not form bubbles.
After the distribution of the gypsum depressions pour the remaining material in the form in such a way to fill it with plaster to the base.The surface should be smoothed with a spatula to form a perfect smooth as possible.It is necessary that the installation moldings on the ceiling laid down exactly.Plaster hardens about a day.Well-dried product is a little ring when tapped.
After the material has hardened gypsum product carefully removed from the mold.If necessary, all the shortcomings can be eliminated with a scalpel.The final work in favor sanding moldings with fine sandpaper to remove surface flaws.
Installation of stucco products
mounting stucco carried out simply and quickly.First of all, you need to clean the area where you plan to glue the product of whitewashing and other contaminants.If you selected a ledge as a decoration, it should be noted the exact boundaries of his proleganiya and outlets for ceiling - to draw a circle in which the product will be installed.
After spraying areas using chisels to make the product and on the surface of the notch.It is necessary for a better grip adhesive base material.Glue stucco on the solution of gypsum, which is added carpenter's glue in a proportion of 3% by weight of the adhesive solution.Then, prepared by the ceiling or wall is moistened with water, molded parts, too wetted, and are applied with a brush solution.By installing the product molding in place, it should be a little push, and a spatula to remove excess solution.
At the end of the plaster stucco is painted.Most often used a water-soluble emulsion matt paint for ceilings.In order to avoid differences in color, it is recommended, along with painting stucco ceiling.Gypsum products must dry completely, they need to be cleaned of dust.If the stucco is installed in the premises with increased humidity, the moldings were impregnated vlagoottalkivayuschey solutions.
modern facilities differ monotony: parallel vertical and horizontal planes create a square or rectangular space.From everyday and familiar environment can go, and the most commonly used and effective way is considered stucco or stucco panels in the interior, which is capable of successfully emphasize the dignity of the room and visually highlight the most important accents in the room.