Some time ago, the appearance of plastic windows in the building market created a furor.Still, after all they are overshadowed by wood in virtually all respects.People no longer had to be every year to paint the window frames in order to bring them into the proper form, and to insulate them from the onset of the winter season.Double and triple glazed windows become a reliable barrier in the way of street noise and drafts, and care for the plastic frames is not difficult.
- Wooden windows back their position
- Needless to set their own wooden windows?
- Should I start ...
- How to get rid of the distortions of the window opening?
- correctly put the window in place
- Fasten the window in a perfectly smooth opening
- fix a window mounting plates
- surest method of securing the window frame
- In good window slits should not be
- Sill and flow can also be set independently
- basic rules installation
Wooden windows back their position
Yet not all cloud.Some manufacturers to reduce their own expenses and the cost of their products using low-quality plastic, releasing even though a small amount of toxic substances, but also has a negative effect on people, animals and even plants.
That is why the installation of wooden windows is gradually regaining lost popularity.People are surrounded by a variety of man-made things are not always safe for health, given the increasing preference for natural materials.Modern technologies allow to produce glass windows, do not differ on other characteristics of the plastic.The wooden frames are now just installed double glazing, reliably protecting the room from cold and noise, excellent modern compositions protect the wood from rotting or getting wet, which leads to swelling and deformation of the frame, and painting materials are durable and resistant to climate change.
Needless to set their own wooden windows?
Do not forget that much of the excellent quality of the window (and this applies not only wood, but also any others) depends on how well respected technology installation of wooden windows.Even a small offset from the regulations may cause rapid failure of or negate the expected performance.
In principle, installation of wooden windows with their hands is no different to any difficulty, so if you want to put in the doorway ready to frame, in the presence of minimal construction skills with this work can be handled independently.But keep in mind that in this case no one but yourself, does not guarantee a good quality of work, and if suddenly something goes wrong, you only have to correct defects at its own expense.
Should I start ...
course, start the installation of wooden windows from the manufacturer is necessary to prepare the window opening.It should be a smooth rectangle, without distortions, large potholes, cracks and other defects.If the room is still an old box, dismantle it and thoroughly cleans all surfaces of the opening of debris, dirt and dust.
How to get rid of the distortions of the window opening?
to the next stage should be taken seriously - it's measurements of the window opening.All measurements are made both inside and outside, and in three places: at the edges and in the middle of the opposite sides.If the gap significantly skewed and straighten it not offered, it is necessary to increase the size of the window so that they exceed the maximum level of the outer opening at least 10-20 mm high and 25-40 mm in width.This can be done by installing additional window profiles.This measure will avoid gaps between the frame and opening places a strong bias.There is another way to get rid of this common defect - is to increase the dimensions of the window frame, but it is best left to professionals, able to do it correctly and accurately.
Ideally, the size of the new window must be less than the internal dimensions of the window opening 25-30 mm.Such a margin is needed to accommodate the insulation material.It should also be taken into account also the presence of the sill so that the bottom opening is better to leave 50-60 mm.
correctly put the window in place
Insert the finished design in the opening three ways, and the cost of installation of wooden windows in any case will be about the same:
- with mounting pad.
- on the mounting plate.
- «through" method.
Set the frame should be at the bars, the same height as the window sill.
Wooden windows better to install closer to the outside.This will keep most of the opening warm.
Fasten the window in a perfectly smooth opening
first method is not suitable for every window.The fact that the pads for securing the opening even absolutely necessary, and to achieve this is not always possible.If it meets the requirements of the opening, the first of its moisture barrier cover, and already at this layer are mounted parallel to the mounting pads window frame.After inserting vertical and horizontal boxes aligned to the level with wedges.
fix a window mounting plates
In the second case, the special mounting plates are attached to the sides and top of the frame, thus they should be located at a distance of 250 mm from the edge.First, the plate is mounted so that it "looked" into the room, and then tilting it is attached to the inside of the window opening with self-tapping screws, but do not tighten them.
If the window size exceeds half a meter, you will need to install another one or two additional plates.
After installing this window in the same way as in the previous case is governed by wedges, leveled and finally fixed with screws.
surest method of securing the window frame
In this case, will be faced with the need to remove the glass or insulating glass.This is done very simply: first gently separated glazing beads, and then taken out of the glass.On the side and upper surfaces of the inner frame are scheduled and drilled holes.Now the frame can be set in place, but to drill holes in the walls is possible only after its full alignment level.
screws are screwed, but so that they can be easily budge, as you first need to adjust the position of the frame and the horizontal and vertical directions.This is done in the same way as in the two previous cases, i.e. with wedges.
In good window slits should not be
To prevent the penetration of cold air into the room and humidity, it is necessary to eliminate all the gaps between the box and the window opening.The most common way of getting rid of the slots - foaming with foam.With a lack of experience make it virtually impossible to qualitatively.Too much foam can distort the frame and cause misalignment of all windows.Of course, you can use wooden spacers to prevent deformation, but it is better not to risk it and purchase any other insulation material.
Sill and flow can also be set independently
installing the sill, it is necessary to have a little bit under the frame, but it must act in the 45-50 mm from the wall.After that it must be leveled on the level and as close as possible to fit the frame.Now remove the sill, and all the space under the frame zapenivaem mounting foam.After installing the sill to the place of the space underneath is filled with foam.
To move the window sill with foaming at the place, it is recommended to place a small load, for example, several water containers.
Ebb installed even easier.First, they are cut to size with a margin of 60 mm (30 mm on each side).Then the tide first fastened with screws to the bottom of the frame, and then point-fixed from the inside with foam.
basic rules installation
So, repeat the basic rules of installation of wooden windows, the observance of which will allow you to own it safe and install wooden window:
- quality surface preparation.
- angles should be equal to 90 °, and the difference in length of the diagonals should not exceed 10 mm.
- obligatory clearances: Lower - 50-60 mm on each side - 15-20 mm.Set
- frame best second quarter window, counting from the outside.
Finally, to understand the whole process was, we offer a short video - installation of wooden windows, which wisely considered all the main stages.