repair can not be imagined without competent design floor.A desire to bring in home improvements or home design solutions unthinkable without careful attitude to this part of the room.Modern construction techniques allow us to make a functional and safe sex, as well as original and attractive cover, which corresponds to the stylistic direction of the room.We offer little guidance as to how to make their own hands 3d leveling floors.Check out the information and see a video about the procedure of arrangement of three-dimensional surface.And you will succeed!
- Technology of the inlet 3d floor
- Preparing photos for tanker 3d floor
- Substrate Preparation
- basecoat application
- drawing figure
- Application transparent topcoat
- protective lacquer coating
- Care of Polymer 3d floor
Technology of the inlet 3d floor
3D technology will be equally spectacular look in an apartment house and in the office, in the country
Technology of 3D sexes based on the effect of creating a three-dimensional image.The "depth" figure depends directly on the height of the topcoat.This technology provides for the use of special paving materials: decorative elements (drawings, photographs, natural and synthetic materials that define the appearance of the floor), and two-component polymer mixture (hardener and transparent manner that is necessary to pre-mix).
For those developers who are willing to make own 3d floor, I would like to make a reservation at once, that you will need in this case, a lot of patience, perseverance and a certain desire for adventurism, as a three-dimensional floor the first time may not be possible.Preparatory work to fill the bulk of sex necessarily include a forced ventilation so that the polymer material to be used for the floor, very toxic that even a respirator is not able to save.In addition, the room temperature should be not less than plus 10 degrees Celsius, so in the winter in unheated rooms do not work floor 3d.
Preparing photos for tanker 3d floor
first determine what image would you like to see in the way.Think in advance and pick up all the little things - the presence of shells, marbles and stones.And then go to a company that specializes in outdoor advertising to make the selected pictures a special fabric that called banner.
These organizations mostly have in stock portfolio with images that are suitable for everything surround sex.However, pictures may not like it, so it's best to stock up on their picture.Before you order the printing of the image, you must ask what the printer provides print quality agency.Remember, its resolution should be at least 1440 dpi, printing images to the inlet floor 3d recommended on matte satin.
Making pictures to surround 3d floor is the main item of expenditure in the process of resettlement of the floor covering.The price of one square meter of fabric will cost approximately $ 100.It turns out that to produce photo - the most precious thing.
Substrate Preparation The process of preparing the base begins with cleaning and leveling the surface of a 3D floor filler.It must be cleaned of all kinds of pollution, such as loose materials, sand and grease stains.The base must be dry, Humidity is not more than 4%.If you are planning to settle self-leveling floor on a metal surface, it should be thoroughly degreased.Cracks are filled with epoxy or sealant, and the pit, and potholes are sealed with quick mixes, made on the basis of quartz-epoxy.
solid surface to tap the porous structure are shot blasted, with regard to soft surfaces - they are ground.At the same time alignment is done fillet.This fixture is a kind of skirting of the polymer mixture to surround sex.Further held dedusting surface with an industrial vacuum cleaner.Before priming the concrete foundation should be vacuumed.
To enhance the adhesion and absorption of the surface-coating is recommended to make a special primer for self-leveling floors, which is applied with a roller.The primer will fill the smallest pores, penetrate deeply into the interior of the concrete.In this way turn out to provide the best mix of the concrete base with a base layer of decorative self-leveling floor.
And if you think that such a three-dimensional floor will be cold enough for you, then you are sadly mistaken!The inlet 3e floor is fully compatible with the technology of "warm floor".However screed 3d heated complicated operation.Although such technology, despite its high cost, may well be the main source of heat in the house.With self-leveling floor can well be used as a system of electric floor heating and water heaters.
By this stage is to pass at least 4 hours after priming.The base layer of the inlet 3d floor can act polymer floor or screed.The first option - is preferable.This polymer flooring is considered an ideal basis for printing by his own performance.If, instead of the image you plan to decorate the cover artificial or natural materials, the base layer acts as a background, in which case the choice of its colors should be approached very carefully.
polymer layer should be applied on rough ground.The main thing is that the resulting base surface was smooth.Check the absence of thicker base floor air bubbles.That is why the base layer should be checked the building level.
After application of the base layer can be engaged in a photo or drawing of the decor.Drawing the three-dimensional self-leveling floor can be applied in two ways: by means of paint or pasting using the base layer.Undoubtedly, the use of colors - the most effective option, but such a pleasure - too costly.Plastic and acrylic paints that are suitable for creating an image of floor and are resistant to UV, are not cheap.
However, the bulk of the costs will result in an artist's work.In any case, it is not necessary to save money at this stage, because of the quality of the image, ultimately, will depend on the overall impression of surround sex.
Pasting base layer pattern is more common way.The most popular methods for patterning the substrate acts as a thermal printing banner fabric and vinyl tiles.Before applying the primer image carried transparent base layer polymers mixed in a ratio of 2 to 1 with a solvent.The primer is applied using a flat brush or roller.Primer consumption is about 300 grams per 1 square meter base.
time polymerization primer is not less than a day.Figure that is made on vinyl adhesive film must be carefully pasted on the primed substrate.When the sticker is recommended to see to it that between the base and the film did not remain any air bubbles.The film is smooth and pressed very carefully.
Figure, which is made on a banner fabric through thermal, you need to stick to the base, as an adhesive using a thin layer of polymer floor finish.After patterning can begin to fill the transparent layer.
Application transparent topcoat
on manufacturing filler 3d floor before actually applying the finishing layer is necessary to calculate the amount of polymeric material.Consumption of the required amount of material depends on the thickness of the layer, which is planned to be done.The thickness is usually not less than 3 millimeters.On average, the processing of 1 square meter leaves close 4 - 4.5 kg of transparent resin floor.
Finishing coat should be applied in such a way:
- in clean containers should be mixed components a transparent floor, using a drill with a special nozzle.
- To cover with printed image should be discarded transparent polymer mixture in such a way as to obtain a uniform layer thickness.
- With rules recommended to level the mixture all over the floor.
- Next is a layer of a polymer laminate floor with a spiked aeration roller to completely remove the thickness of the layer of bubbles.Rolling continues until the beginning of the thickening components floor (15 - 30 minutes).
When leveling the floor and rolled with a roller on freshly poured floor surface can move only in the shoe, which has a high spikes on the soles.To become the most laid a solid floor, self-leveling floors of 3D technology in the first days after the installation, you can close the floor surface with plastic wrap or foil.The time of final solidification volume depends on the thickness of the floor covering, as well as temperature and humidity.
protective lacquer coating
After polymerization and final curing clearcoat finish should apply a protective varnish, which further protects the polymer layer from mechanical or chemical damage and significantly extends the useful life of your floor.In addition, there are some types of lacquers which are capable of conferring anti-slip properties of floors.
Care of Polymer 3d floor
of Polymer three-dimensional hollow, treated with protective varnish, is not too difficult to maintain.The coating has no cracks and gaps where dirt can become clogged and dust.Self-leveling floor is able to withstand any load.Volume floor will not suffer if you drop it or bulky thing to put on his heavy massive sofa.
However, despite the high wear-resistant properties and high strength liquid 3d floor, with time they appear scratched.These floors under the influence of time lose their luster.As for any other surfaces for self-leveling floors need regular care.
Paul to persist for a long time an attractive appearance, it is necessary to follow the simple guidelines:
- After pouring the floor should be protected volume with mastic.Repeat this procedure every six months is recommended.
- If you plan to perform the work associated with painting the walls, running water or electricity, it is necessary to protect the coating plastic, hardboard or cardboard boxes.
- legs of chairs, tables and other furniture is recommended to provide the felt packing.
for the daily care of the three-dimensional self-leveling floor is best to take the clean water with a little detergent.Then again should wipe the floor with clean water without chemistry.When washing in any case, do not use agents that contain chlorine, caustic soda, ammonia and acids.
self-leveling floor cleaning involves removing dust from the surface of a vacuum cleaner or a brush, wash the floor with detergents while using a non-abrasive cloth, as well as drawing on a dry and clean floor of the protective layer of wax.With timely and proper care inlet 3d floor will retain its quality for a long time.And if you still damage the coating, it can be repaired - separate sections or in full.
Thus, the uniqueness of liquid 3d floor is the possibility of creating any design covering that will fit the overall style apartment, office or public institution.Drawing on the floor can be anything, it all depends entirely on your imagination.We hope that with our material you can figure out how to do self-leveling floor 3d hands.How were you able to observe the development of this technology for quite accessible even to non-professionals.And this in turn means that you will be able to transform your apartment.Paul will look like you have been dreaming.The game is worth the candle, is not it?