One of the main components are a veranda window.Most looks nice panoramic windows, which does not prevent the penetration of sunlight into the room.But even along the entire veranda windows standard size create an atmosphere of unity with nature.Of course, high-end cottage used only expensive window profiles, but for a country house is quite possible to make a frame for the porch with his hands.
- Features designs for windows veranda
- fully glazed veranda
- Production of wooden frames porch with his hands
- veranda of the old window frames
- Useful tips
Location window,their design and the material from which they are made, are being developed at the design stage verandas.They need to create comfort indoors, be functional and easy to operate, and harmoniously complement the appearance of the house.
Features designs for windows veranda
long ago to create panoramic windows at their dachas was impossible.Large size soli
desire to create a unique interior has become a fashion trend in the use of non-standard size frames veranda.As mentioned earlier - this wide panoramic windows with very narrow frames.
Or conversely, narrow windows with wide sashes decorated with wrought-iron grilles.
According to the system of opening frames porch divided into several types:
Swing - is the most common version of windows.They are the easiest way to do it yourself.Narrow frame, width 80 cm, composed of one sash opening.A wide have two or three parts, one of which is hinged, the remaining performed blind.More convenient to use the window casement width not exceeding 60 cm. Current Rating opening systems due primarily to its low price and good teplosohrannymi properties.
sliding frame - very practical, especially for small and narrow terraces.If they just postponed the opening frame on skids sideways, without space and without attracting attention.But they have the drawback that due to the construction.Due to the presence of gaps between the frames, there is a loss of heat.And make them yourself is not the best idea, as the wooden construction is more complicated to operate than made from PVC.
Multifaceted design - interesting and original version of the window frames to the veranda.Total frame consists of several small-sized, narrow frames, which develop and move apart on the principle of an accordion.This system covered porch is easily transformed into a terrace, and vice versa.
Prices for finished wooden frames veranda very different.They are influenced by many factors: the manufacturer, the quality of raw materials, the number of windows, their size, etc.Of course, making their own hands, you can save the budget glaze large area room.
fully glazed veranda
Such glazed veranda is the only option, if the creation of more complex structures are no special tools.
solid glass with no possibility of dismantling:
- as window frames veranda serve as wooden slats (size 3x5 cm or 5x5 cm).They must be cut to size, sanded and attach to a wooden screws on Lutkov (from 7 to 9 cm in length).
- then both sides are attached to glass silicone sealant, and the joints are closed casing, rail or trim strip.
Production of wooden frames for sun porch with his hands
Making even a simple construction of the swing frame is quite time-consuming process.In theory, it makes it easy, but in order to achieve quality results require knowledge of all the intricacies of the technology and the use of special tools.It is important in the manufacture of wooden frames veranda create the correct geometry provides sealing structure.In addition, the need to fabricate low tides, which have a rather complex shape.
Make a frame for the window that meets all the requirements, it is very difficult.But the design for glazing verandahs holiday home, do not have high standards, so it is possible to perform all the work yourself.Consider the example of the manufacture of single-frame design.
As a material for wooden frames are best to use spliced, well-dried wood, which is practically not deformed under the influence of moisture and does not shrink.But the piece or timber, in this case, is not recommended.
design of the window frame to the porch consists of two parts:
- box, which is mounted in the window opening.It is made of planks 5x15 cm in size;
- wooden frame with glass.To her suit bar with a cross section 5x5 cm. Easier opening provides a gap with a box of 1-2 mm.
But in any case, the dimensions of the boxes and frames are selected individually, and depend on the size of the window.They should provide the necessary rigidity.
primarily made box.On board with 5x15 cm section of the groove is chosen to create an L-shaped profile, which will provide the desired tightness.Make it easier just electroplane.
After this, the boards are cut out of the 4 pieces in size of the opening, and connected with each other on screws or by direct cleat.During these works have to follow the correct geometry, and check the levels of all the stages of work, to achieve a smooth angle of 90 degrees.Strengthened by a box installed at the corners of the metal parts.
Production window frame technology is similar to the manufacture of the box, but the only difference is that the connection is performed by a pin and bracket.This is necessary in order to achieve maximum strength, because in contrast to the stationary box, the frame will be constantly opened and closed.
profile wooden frame made for a glass or two.Lower groove for fastening the box and the upper window inserted.The dimensions shown in the figure, suitable for a glass thickness of 0.4 cm.
Now begins the assembly of all elements of the wooden frame.First, gather all the details of the frame, and then inserted into the glass.After that, the box and the frame mounted hinges, latches, and all the wooden elements covered with protective composition.
veranda of the old window frames
Do not rush to throw out the old window frames can be made of them not only the greenhouse, but also frame the veranda.Later, he sheathed facing material or re osteklyat.
frames are removed from the first latches, handles and other accessories, as well as all the glass removed.For future framework veranda frames placed vertically on screwing screws or nails nailing to the floor.In places where it is assumed the window frame with a window leaf are attached in such a way that it opens inwards.Thus, all sides are trimmed porches, not forgetting to leave an opening for the door.Over frames mounted boards or beams, which will be based roof slope.
- before work should be drafted, which will be shown all the dimensions of windows and their appearance;
- with proper glazing terrace throughout the day should be light;
- leaf swing frames should always open inwards, it will provide a constant flow of fresh air into the room;
- best to have glazed veranda on the east or north side and overlooking the site.