Someday, you're sure to run into the problem of dismantling the toilet.After all, as all communication in the house plumbing should always remain intact.But such things while ruthlessly.Therefore, even cosmetic repairs in an apartment requires replacement of all elements of the bathroom and toilet.Before installing the new toilet is necessary to dismantle the old plumbing fixtures.This activity - not the most pleasant, but, nevertheless, quite simple, not long and quite doable own.
- Dismantling toilet
- Exemption grounds toilet
- Dismantling of toilet sewage pipes
- Dismantling Soviet toilet
- Installation of temporary toilet
- mount the new toilet bowl
- mount on dowels
- to mount the toilet taffeta
- internal mounting toilet cistern installation
- Water supply
Removing the toilet bowl
Dismantling and installation of temporary sanitary device is not a too difficult task, as you have noticed.In after re
Removing and replacing the toilet, who served his term, necessary to ensure the comfort of the residents of a city apartment or a country house.Before the operation it is recommended to stock up on all the necessary tools.May be needed during the operation keys of various sizes and a crowbar.It is also good to have on hand pliers.To get rid of the remaining water should be reserved many rags.
all operations associated with the dismantling of the bowl with your hands, you need to produce rubber gloves to protect your hands from micro traumas and bacteria.Before starting work it is desirable to thoroughly wash the bowl and process it in some disinfectant, such as bleach, because it's still a breeding ground for harmful microorganisms.You can rinse the toilet running water with antiseptic dissolved in it - the usual "whiteness", which is well suited for this purpose.
After that, the space in the working area should be free of all the present objects, you need to clean all the way to the mat.Removing the plumbing made to start off with in the cold water supply line.The water that remains in the tank, it is imperative to drain, and should provide a complete inactivity of sewage - water is not necessary to enjoy themselves, but should also prevent neighbors from top to refrain for a while from the water treatments.After making sure that the supply channel is securely closed, you can proceed to the removal of the toilet.
Exemption grounds toilet
should start with disconnecting the hose that supplies water from the pipe.The next step in favor dismantling the tank, because it will be harder to physically remove the bowl along with the tank.Drain the latest water tank, remove the nuts that are located on the back side of the structure, and open the cover.If the tank is hanging on the wall on its hinges, it is possible to remove it without breaking.
Then you need to release the base.If your toilet around beautifully laid tile, then it will have to beat.Fastened to the floor in the toilet two or four locations bottom of the bowl.Sometimes the toilet or wrench on the connection pins, which is encased in a floor, or a bowl, which is screwed plugs having a hexagonal heads.But in any case it is necessary to unscrew the mounting spanner certain size.
When worn on the heels need to slightly raise the base and a slight shake of the seal in the pipe discharge sewage to shatter.If the seal of the socket tube was done using a cement slurry, it is recommended that before removing the base chipped this solution using a chisel.
better to use a thin chisel, chipping with extreme caution cement light strokes - chisel tip made to send across the wash, in the opposite case, the pipe may burst or release funnel toilet.Once one side of the coating will crack, the same operation must be done on the opposite side of the issue.Fragments should vykovyrnut toilet and try to get out of the discharge pipe.If you fail, chipping cement is recommended to repeat.
However, if you got the most difficult option, which involves mounting the base to a wooden board, in this case disassembly of the toilet will be traumatic for the plumbing.We'll have to fight off the bottom just to remain in the floor together with the base attachment, then it must get by parts when the work is finished.
Dismantling of toilet sewage pipes
As a rule, throw away the old sanitary devices, so that they do not need to feel sorry.In order to avoid injury while the tile pieces, carefully follow the recommended safety precautions - wear protective goggles and gloves.Now the toilet is connected exclusively with cast-iron sewer pipe, and from it you can disconnect several ways.These methods are varying degrees of destruction.Accordingly, the price of dismantling different, when you order a service to professionals.
before removing the bowl is recommended to make a special plug, which is a cloth gag, which has a size of about 100 millimeters in diameter.This stopper hole must be plugged into the branch pipe, thereby preventing ingress into the flat sewer gases.
first method appears destruction.According to this method should discourage removal, carry the toilet, and then just clean up the socket of the grout and ceramic.Can snap off removal in a situation where the toilet is not fixed to the floor, the maximum clearing butt and retraction of the pipe from the solution, lift it and pull up.Will clear the remnants of the pipe without damaging the sewer itself.Try not clog drains fragments better than opening a clog.
can choose a more humane way if attempts are made to preserve the integrity.To the smallest residues must be cleaned joint sewer pipe from a toilet to seal the solution and other impurities.Lift the product, see how it began to move freely in the tube.Slowly rocking scroll and tap, you need to get him out of the tube, parallel to the passage from the scrubbing solution.If you managed to get the toilet, it is necessary to clean the tube for future installation.
Dismantling Soviet toilet
And it also happens that when it came to bathrooms, the home where the product meets the sullen, which was encased in the conscience of decades ago from the time of construction of the house.Then, removal and installation of the toilet will become quite troublesome task, but if you do it yourself, then surely get into its design and in the future repair problems you do not deliver.
most difficult one on the right is the dismantling of the Soviet toilet, because the design is very unique, and the device was fixed in such a way that it is virtually impossible to tear.Therefore, you can not, most likely, to keep it safe.Examine the floor near the toilet, assessing method of attachment.
next problem that occurs in the case of the dismantling of the Soviet toilet, especially if your plan is to reuse the toilet, for example, in the country - is how to disconnect from the sewage discharge.During the construction and installation of communications in Soviet times was made a first-class integrity, rare exceptions.Joints obscure solution so deep that today lead him gently, without damaging the pipe or sewer discharge, it will not turn.
Installation of temporary toilet
At the time of repair in the bathroom, you can put your own hands a temporary toilet.At the same time it is not necessary to resort to the help of experts, or strangers.Also required minimum stock of tools.Temporary toilet is better to install without cistern.Plus it will also be a temporary connection to the water bowl.In this case, flush the system recommended by the pouring of water, previously set in the bucket.
For the stability of the sanitary device under it accepted to equip a shield or place a piece of chipboard measuring 500 by 500 by clipping through the toilet mounting holes with screws and washers.It is better to buy a hex head screws required length.If the need arises, so they do not protrude from the bottom of the shield, long screws can be cut grinder.
Temporary toilet conveniently connect to the sewer corrugation.This design allows you to quickly remove the plumbing to a different location, just a minute, and also quickly put the toilet back.To repair the surface during soiled toilet as little as possible, wrap it in cellophane and fix the outside with tape, which should be glued only cellophane, because the body will be difficult to remove the remains.All the assembled structure is desirable to close a piece of chipboard or plywood to protect against debris, solution, dust, or accidentally fallen into the instrument.
mount new toilet
For installation of the new toilet, including hanging toilet ideal standard, in addition to the toilet at hand you need to have another 3 important parts: corrugated pipe about 15 centimeters in diameter, eccentric and fasteners.With all the fixings clear corrugated pipe is used instead of the old, that goes to the collector and eccentric is used to connect the corrugations to the toilet.
There are three main methods of fixing plumbing fixtures to the floor:
- Mounting with dowels.
- Attaching a taffeta - a wooden board that is recessed in a recess floor.Taft should be made with a well prooliflennoy timber, for example - oak.The toilet after installation taffeta made to strengthen conventional screws.
- Fixing the toilet bowl with an epoxy adhesive.It is necessary for the support surface to cause the resin layer, the thickness of which should be close 5 millimeters, and then squeeze the toilet to the floor.
mount the toilet on the dowel
before installing the toilet is strongly recommended to deal with the mounting.If the placement of bolts fastening the same old with the new, then you can install a new toilet in the same place.Do not be too big holes for dowels, which in turn must not fail, but definitely the case should not be less than the required size, it is unnecessary to hammer the dowel force.If fixing cracked or damaged in any way, then it will reduce the stability of the toilet.
If you move the toilet need to find the most suitable accommodation in his room, and it is worth remembering that the corrugated pipe to join the sewage shall funnel without obstacles.With the corrugations, if necessary, you can manually determine the angle connections and the required distance from the pipe to the wall.
finding the best location for installation, you need to outline the contours of the seat plate plumbing fixtures felt-tip pen or pencil, and it should be noted mounting holes for dowels.Pushing the toilet, should be drilled diamond drill holes for mounting that marked earlier.
The most difficult work is considered drilling tiles.It is necessary to drill a hammer drill with a drill, but the top layer is recommended to drill without impact, and then you can do and strikes.The main drilling is virtually no pressure on the drill, the impact it will make the function itself.Punch is not considered suitable equipment for the job, but after you pass a tile, it is possible to apply and punch.
to mount the toilet taffeta
Prior should prepare the toilet hole.If the holes are suitable for standard outlets toilet - it's good, but when it is not recommended to use special nozzles present complete with plumbing fixtures.
internal fixation toilet
mount toilet is inside and outside.However, along with the internal fixation is considered to be more prevalent.It is necessary to put the toilet seat and indicate the markup.On the tile should be noted on the inner side attaching, it should be noted that after the drilling location by attachment to the floor which are fixed by means of bolts.
next step is to drill holes for fixing plumbing fixtures.Principles of drilling are similar to those described above.To drill during the drilling does not go to parties have to do chipped in places previously marked for this you need a hammer and a core.
into the prepared hole, insert the dowel, set the bowl in such a way that the plugs in line with the mounting holes.Do not forget to put the gasket fixing.If it does not need the inner side of the floor circuit encircled silicone squeeze around the perimeter.Silicon, however, will not be superfluous, and when laying there.
Installation deposited silicon bumps and fills the gap between the floor and the toilet, as well as block the access to penetrate the dust, and toilet water.And this in turn means that there will not breed bacteria and mold.And it prevents rusting fixtures toilet, which you can easily unscrew many years later.
then be inserted into the holes in the landing heel plumbing fixtures screws and washers, and accordingly tighten them firmly in the dowels, but do not avoid damage to the toilet are too pinched.Mounts recommended alternately tighten diagonally to the toilet is not twisted.
Next release should connect the device to the neck of sanitary sewers.Immediately before installing the corrugated hose it is necessary to grease from sewage silicone.From the side of the bowl to grease not required, but it does not hurt.
After this work can be taken for the installation of a tank.Be sure to insert between the toilet tank and sealing washer, and the bachek mounted on two stainless steel screws.From the tank bolt as necessary to put the seals.
installation of some of the most modern models of toilets, water hoses, and attaching the tank performed almost without tools.The only thing needed is an adjustable wrench that is designed to tighten the mounting screws and attaching the hose to the water.It is not necessary to use such tools as pliers and a hammer.
Water supply water to the toilet bowl fed by a flexible hose.Nuts made to draw in hand and only when it is impossible, to draw in half turn with a wrench.In the compounds of the hose as a sealant applied silicone or rubber washers.It is not necessary in any case to use a sealing reeling because its use can cause leakage.
It is important to avoid excessive tension of the hose, it should always be with a margin.Once connected the water to the toilet, it should be a little bit later, to purge the system of silicone residues and debris that will cause flush valve damage.
water can be brought, using a flexible hose with a metal-plastic or copper tube.This is the most reliable materials that are able to increase the life of this liner at times.After installation, the toilet is not recommended to use it for at least four hours to completely silicone froze.
But it is better not to use the toilet at least six hours to as much as possible silicone entrenched, well, you need to look at all of the circumstances.Finally Council - with sealing corrugated sewer pipe with silicone do not regret, it is commonly applied in such a way that it is not fell into the pipe.
Now you figured out how to dismantle the old plumbing fixtures and install a new one.Furthermore, removal and installation of the toilet requires unquestioning compliance with the requirements of health and safety, so be sure to wear protective goggles and gloves!