windows - this is the most vulnerable element of the window.Modern wooden Euro windows are equipped with complex structures, which can not be repaired with their own hands.The only solution is to order and install new windows.Also, they are replaced when you want to improve teplosohrannye and insulating characteristics.Consider the properties of glass and how to properly install them in a wooden frame with his hands.
- Selecting glass
- Species glass for glass
- What is different plastic and wooden frames
- In some cases, replacing the glass in wooden windows
- Repair of wooden windows with double-glazed
- Replacing glass with their hands
- Safety at replacement of glass
- replacement glass service center
- cost of wooden windows with double-glazed
IGU is a product consisting of two, three or more glass paintings, which are interconnectedaround the perimeter of the metallic envelope.Hermetic space between
double glass pane thickness of approximately 24 mm.They have a low coefficient of thermal resistance.Already at - 8 ° C to condense them.Therefore, single-chamber double-glazed windows are recommended for use in relatively warm regions.The level of insulation also leaves much to be desired.Their only advantage compared to the triple-pane windows - a relatively low price.The main applications of single-chamber double-glazed windows - administrative offices, balconies, loggias.
considered more popular triple-pane windows.It has excellent heat-saving and sound insulation properties.As a rule, double-glass uses special low-emissivity glass coating which reflects infrared radiation returning warmth to the room.Triple-pane windows - ideal for premises.
In the northern cities of our country, where very high humidity, it is recommended to use a three-compartment windows.
Types of glass for glass
To increase the strength of glass in their production sometimes use tempered glass.Such glass is subject during the production process vysokotermicheskoy processing, whereby it becomes mechanically strong and thermally stable.Externally, the tempered glass is different from the usual, however, the outer coating is damaged, it is perishable and can not be cut.Due to the fact that the tempered glass fragments have no sharp, dangerous edges, it can be installed where enhanced security is needed.
Triplex or laminated glass consists of several layers, between which there is a layer of polymer film and a thin layer of a special resin.The main advantage of laminated glass is its safety.From the bounce is not the glass shatters into shards, they are deterred by the film and resin layer.Another advantage of the triplex is considered its excellent sound capability.
Another type of glass that is used in the manufacture of insulating glass units - energy saving.In conventional glass making special coating ultrafine layer, whereby the degree of heat protection increases several times.Depending on what cover is used, glass products are divided into hard and soft cover.
glass with a soft coating has a high degree of thermal protection, but at the same time they have low humidity.As well as the installation of additional equipment soft cover must be removed.
Although glass paved the degree of heat protection is somewhat lower, they are more often used in the production of modern double-glazed windows.Their main advantage is the high moisture resistance and excellent sound insulation.
in modern industry in the manufacture of glass are used as solar glass.On one surface of the glass, a layer of metal oxide having reflective properties.Solar control glass, or as it is called, reflex, protects the room from the UV rays and gives the surface of the glass mirror effect.
What is different plastic and wooden frames
As soon as the windows, they flooded the construction market.Their manufacturers have focused on their advantages over wooden predecessors.In the first place they called the fact that for the plastic frames and windows almost do not need care.They do not need to paint, and they will last much longer.A degree of noise and heat insulation is much higher.
Recently, however, consumers pay much attention to ecological materials.Plastic is a product of the chemical industry, as well as most people believe, the whole chemistry is harmful to health.
manufacturers as wooden windows with double-glazed recently been able to upgrade its products so that it is hardly any no way inferior to their plastic counterparts.Modern wooden windows double-glazed windows are used, which makes them look very presentable.And the battery life is not less than the plastic windows.
have wooden frames have a significant advantage.It "breathes" and virtually no plastic breathable, so a room with plastic windows should always be aired.Since wood is hygroscopic, it may appear mold and fungus.To avoid this, wooden frames treated with special protective solution.
Regarding sustainability, plastic windows do under certain conditions, can release toxic substances, but in very small quantities.With regard to wooden windows, the tree itself, of course, environmentally friendly material.
But do not forget about the harmful paints and varnishes that are used in their treatment.Therefore, the only significant difference between plastic and wooden windows and frames is their price.And if a few years ago, plastic windows were worth several times more expensive than wood, but now the price of modern high-quality wooden windows with double-glazed windows are much higher.
In some cases, replacing the glass in wooden windows
Of course, the main reason for replacing the glass, it is mechanical damage, ieHe smashed or cracked glass.But there may be other reasons for replacement.
If you have a problem with constant fogged glasses or winter frost window covered with a layer of ice in the room cool, ie,broken insulation or windows do not perform their function of sound insulation, it is also an occasion to replace the glass in a wooden box.
therefore begin to replace, to determine what is the main goal you are pursuing.
As mentioned before, double-glazed windows have a different thickness, are single-chamber, two-chamber, etc.When the goal is to warm the room, choose glass with lots of cameras and energy efficient glass (I-glass).For best acoustic room should choose packages with glass having a different thickness.If it is a double-glass with the thickness of the glass 5, 4 and 6 mm, it can prevent the resonance occurs, and the noise from the street did not penetrate into the room.
Repair of wooden windows with double-glazed
windows - is the most important, yet most fragile part of the window.He can break or simply scratched.In addition, glazed sometimes does not function, for any reason.To resolve all these issues will have to replace the damaged glazing.
Many believe that this work is the power of each, would be the right tools.However, modern glass windows, have a rather complicated structure.And in order to cope with the replacement of the glass, you need to prepare well.You need to study the structure of the window and buy all the necessary tools.
In addition to the silicon and glass need sighting guns difleks knives for stripping silicone, straightening plates, mallet.Naturally, you need to have the skills to work with these tools.
Before you start work, you must order a new double pane windows.It is better to buy it in the firm, which is engaged in their production.Much attention should be paid to the process of measuring the length, width and thickness of the glass.If a new package is ordered of the same thickness as the old one, you can save your money.The fact that, for installation in a holder glass thickness is used for each specific glazing beads, and if the thickness is not changed, they do not need to change.All sizes better to shoot with the old package.When the window opening has a complicated shape (arch, rhombus, triangle, oval and the like), after removal of the pattern size becomes.It remains to pass the measurements made in the company for the production of double-glazed windows, and wait, ready to order.You can pick up your order yourself or pay for home delivery.Be sure to check the quality of the new glass, it should not be any - any defects in the form of air bubbles, scratches, etc.
Replacing glass with their hands
Repair of wooden windows with double glazing and a very laborious process requiring specific skills.If you decide to perform the work yourself, you will not prevent some tips.
first step in replacing the glass is dismantling wooden glazing beads.Use for this work to be special plastic blade.
better to start with one of the long glazing beads.The blade or spatula gently inserted between the frame and glazing bead, moving deeper into the blade, it is necessary to ensure that the bead began to separate from the frame.Engage him in the middle, pull it gently along the glass.The same is done with the others, leaving the last upper bead.
Since the glazing is glued to a wooden frame sealant, it is cut with a special knife.Then remove the old glazing.You need to try to remember the position of the pads under the glazing, so that when they re-install no problem.The next step - a thorough cleaning of all the grooves of the old sealant.Necessarily it is necessary to examine all of the frame for defects.If present, is working to address them.All irregularities stripped sandpaper, cracks and scratches shpaklyuyut, primed, and then covered by the new paint.After all the repair work on the horizontal surface of the frame pads are installed.
It is important to do the right thing, that they are not blocked drainage channels and do not interfere with removal of moisture.Keep in mind that different types of windows (swing, deaf, folding), set the pad is not the same, becauseOne of the functions of the gaskets, the correct distribution of the load on the hinge.
When installing the glass plate in a remote box can be placed just below.If a window having an openable sash, the plates are installed in two corners of the indented at 10 cm from the bottom of the loop and the top - bottom diagonally loop.Next
being replaced glass, and set all the glazing beads in place.First, the upper bead is fixed, then the bottom, and then the side.After that all joints are sealed transparent sealant.
There are situations when the replacement glass is very complex.For example, if the design requires soldered onto the window seal.In such cases, it is better not to take on the job yourself, but entrust it to professionals.
Safety at replacement of glass
When replacing damaged glass need to comply with certain rules that will prevent injuries.Any work related to glass, is potentially dangerous, since the edges can be very sharp.To prevent cuts, work should wear protective gloves.The best option would gloves with latex coating.
to broken or cracked glass not dropped, it must be secure with tape or other adhesive tape.
replacement glass service center
If funds allow, of course, it is better to entrust the replacement of glass art.Especially when not necessary to replace the entire glazing, but only part of it, i.e.broken glass.Typically, such a repair order window when the package contains whole components, which have no analogues, for example, glass painted or stained glass, or other unique glass.
Many firms offer to perform the replacement of glass on the spot.It seems to be nothing wrong with that, glazed dismantled, replaced by a new glass, and covered with sealant.But do not forget that in between the glass plates filled shiny silica (powder, dry air).During the time when the glazing is depressurized, silica gel time to acquire moisture from the air.And some time after replacing the glass in the windows will act moisture.Or silica gel is drained from the window as a yellow gum.If you need to replace just the glass, not glass as a whole, it is necessary to choose the company that will offer to lead glazing repair factory.Actions of experts in this case should be the following:
- dismantle glazed windows with broken glass;
- close the opening formed by several layers of construction of the film to reduce heat loss;
- factory disassemble glazed, replace the damaged glass;
- lead refurbished windows and set it in place.
cost service center to replace the glass depends on various factors, chief among which is the profile of the material in which the package is installed.Also play an important role location of the facility, the number of cameras, the thickness of the glass.For example, to replace the single-chamber glass in a plastic box will cost about 4500 rubles per square meter.While in the wooden profile price becomes twice.
time it takes to repair or replace the glass on average three days.If issued an urgent order, the replacement is carried out during the day, but will have to pay one and a half times more.
When choosing the company for replacement of glass, it is not necessary to adhere to the principle of "the cheaper the better."It should be remembered that the replacement of glass - a complex process, so it can only trust the experienced professionals.Do not skimp on the company's services, choose only proven companies.
cost of wooden windows with double-glazed
price of wooden windows with double-glazed formed of several components.This breed of wood, the amount of glass in the pane, the functionality of the valves and the cost of hardware.
most expensive box of oak.This luxurious strong and durable material.Oak windows easily tolerate large temperature differences and all the negative effects of the environment.Over the years, they not only become worse, and made even more durable.Oak tree species ideal for regions with harsh climates.Wooden windows with double-glazed windows of this material have an extremely positive feedback.
following are descending on the price of larch window - aesthetically pleasing, water-resistant and fire resistant.They are easily distinguished by a pale redhead shade.
Recent in price but not in quality pine box.It is the most common and well-known in our country material for wooden windows.It has a reasonable price, while delivering good performance to temperature.
Posted by in Windows