Any painting with a brush or roller is quite time-consuming, complex and takes a lot of time.The process of painting the ceiling latex paint can be facilitated by using a special gun.Besides the easiest gun can be assembled from a vacuum cleaner "Whirlwind", a plastic cover with spray cans and glass of cucumber.Let's discuss how to paint the ceiling latex paint using a spray gun.
- Advantages of painting the ceiling spray gun
- Spray painting the ceiling latex paint spray guns
- correct choice of gun
- Production gun with their hands
- Paint the ceiling latex paint spray gun
- Preparation for paintingCeiling spray gun
- procedure painting ceiling paint sprayer
- errors painting ceiling paint sprayer
Benefits painting ceiling paint sprayer gun
use when applying water-based paint has serious advantages over the use of an ordinary roller.Now look at them in more detail:
- spray gun painting ceilings, above all, is practiced due to the much higher performance procedure.The difference in speed as compared with a brush or roller - by several times.In addition, this unit allows you to paint a very large area of the ceiling.
- layer of paint applied by a spray gun turns smooth and very thin, which reduces the drying time of the ceiling.But if you still have caused too thick and hanging drop, they just need to collect sponge.
- reduces to a minimum the problem of heterogeneity of the ceiling painting.Apply using a spray gun uneven coat of paint is very difficult.
- When using the gun, you can forget about the hard to reach areas.For air jet, which carries a fine spray dye composition, inaccessible areas simply do not have.
- paint, which is applied using a spray gun, does not flow, so you have less chance to fill paint the floor and other surfaces, and dirty clothes.
- divorce and bars you will also be able to avoid the spray gun when painting the ceiling, because not a single object does not touch the surface of the ceiling.In the paint it affects only the surface tension.
- Spray is able to work not only with water-based paints, but also copes well with putty and paint.
- using a spray gun, you'll spend a lot less paint than when painting with a brush or roller, and therefore the cost of painting the ceiling latex paint will be lower in this case.
Spray painting the ceiling latex paint
In today's market offers a huge variety of different spray guns for every budget and taste, so that when you select the tool itself remains the main criterion for just your personal preferences and the amount of money you can spend onit.
spray guns Spray gun manual type for water-based paints are the least expensive and relatively simple apparatus for painting the ceiling.The unit itself is the similarity of the "rod" and the pump.The pump creates a pressure in the tank by means of a fishing rod is sprayed pigment.In addition to painting with latex paint, a gun copes with chalk and lime mortar.The average performance of the device reaches hour 200-225 square meters.
Electric spray guns, which are fed by a network of 220 volts, for water-based paints are the most popular type among the newcomers to the painting works.For their operation requires the use of some additional equipment such as the application of pneumatic apparatus.On the market there are several modifications of the electric gun, but gained the greatest distribution models that are based on the method of airless paint spraying.
Air spray guns for water based paints are already considered a professional equipment designed to work with any structures.Most spray guns of this type on the market operate on the principle of compressed air.Available are models with lower and upper reservoir location.This should be considered, depending on the type of surface that you have to paint.
correct choice of gun
When choosing a high-quality spray gun for water-based paints should be familiar with some rules.Pay attention primarily on the material of the body system.The best option is considered to be the fabrication of the aluminum with the presence of nickel corrosion-resistant coating.Plastic body, despite its reduced weight, will serve you not too long, in contrast to the body of aluminum.
holes which are in the lid must also be made of aluminum.Also very suitable as a material brass and stainless steel.Then you need to check the quality of the seals.The best solution, if they are made of Teflon, because a part of many paint formulations contain a solvent which is able to corrode all substandard pads.
Spray have different placement of the barrel.The principal difference in this, is whether above or below the flank.Barrels made of different materials.Barrels made easier to wash metal and nylon - will help determine the flow rate vodoemulsionku, since they are more transparent.
When selecting the gun, remember that if your plans do not have the conversion painting ceilings in their own business, and you are not waiting for a lot of work, but just a small repair in your own home, then you should not overpay for professional pneumatic machine.After all, it necessarily lead to an increase in the price of painting the ceiling latex paint.
For such purposes the most simple hand gun without any "bells and whistles", which cost about 400 rubles.But if you need to work on a high ladder, you should choose an electric gun, as it is more compact and easy to carry and use at a height, and just held on the back by means of a belt, which is much easier painting.
Production gun with their hands
Spray is not very difficult to do on your own, most importantly strictly follow our detailed plan for the production of the device shown below.To make a simple spray bottle, no need to be expended in this case the purchase of special materials.Prepare to start a small piece of foam, which is used during the warming of the balcony, or as sound insulation material.
Cut foam element of the desired shape.The form element is selected, depending on the chosen vessel for paint.As the vessel approaches every bottle or can.At the same time the neck should be wider.The cut foam members should fit snugly into its lower portion in the container neck.
done in the surface of the foam a few holes.And even better - drill, because when you create a hole, you can easily damage the fragile foam.One hole is made with the top side of the blank, there will be installed a hollow rod (empty housing of a ballpoint pen).
Another hole is drilled horizontally.It set the bar body.When making holes, which are arranged vertically can be used as a stop bottle cap, which acts as a receptacle.
Paint the ceiling latex paint spray gun
vodoemulsionkoy Painting the ceiling using the gun is not very different from painting some other surface, but is, nevertheless, a number of the features that you can celebrate by watching a video on painting the ceilingwater-based paint, and that it is important to consider if you are really a beginner painting trade.
Prepare spray gun to paint the ceiling
start any painting is necessary, first of all, to prepare for the application of paint.The water-based paints add water and mix the resulting mixture, if required by the user.This is usually used construction mixer or whisk to drill.Water-based paint does not corrode the skin, so in the absence of mechanical tools, you can even mix composition hands.
then need to add the color scheme if you want to give the paint a certain tone.Add small doses of the substance and constantly stir.Remember that leaving a mixture of caramel divorce unacceptable.It is better to prepare a portion of the paint with the stock, since its shortage will be very difficult to catch this particular hue.
Note that the ink composition is in liquid form more vivid and deeper shade than in the dried out and application form.As a rule, even the Bank of paint that was opened recently in itself contains the dried particles of paint and various clots that can block the nozzle in the subsequent gun or similar clot leave on your ceiling.
Therefore lakokrasyaschy composition must be perfectly clean and free of foreign particles.It is recommended to filter the paint through any vlagopropuskayuschey dense fabric that does not have a hydrophobic impregnation.Skip necessary to have diluted the composition.Filtering helps you to get rid of lumps and clumps of dried paint and other debris.
dyeing procedure ceiling latex paint using paint spray gun characterized by using a roller or brush that hangs in the air a large number of the pulverized composition that is deposited not only on the ceiling surface but also on all surfaces, including your eyes and respiratory organs.Therefore, you should always wear a respirator or a gauze bandage and goggles, as shown in the photo on the ceiling painting with latex paint.
All movable objects and pieces of furniture to make the best out of the room before the end of the work.All fixed - Nestle plastic wrap.Related plane hit the paint which is undesirable, too, must hide the fixing polyethylene masking tape or other means.
procedure spray gun painting the ceiling painting the ceiling
using the gun is able to provide you excellent results when compared with the use of a brush or roller.When painting a ceiling is important that the layer of paint which is applied, was the most uniform and thin.Before painting the ceiling should be given to the nozzle spray gun in hand, since the beginning, he can throw too much paint.
Once the paint will be sprayed evenly, you can proceed to the application of the composition on the ceiling.suitable distance which separates from the ceiling surface of the gun - about 30 - 50 centimeters.The optimum speed of the nozzle is 5 seconds per meter.The jet should be directed perpendicular to the surface of the painted ceiling.
Mentally divide the plane into squares, about equal to the length of your hand.And you will be painting the squares one by one, first lateral, then the longitudinal movements.Using the spray gun can not be in any case, a long stay in any one area, because he got too thick, and all the material drops down the drain.The color is best done by adhering to a tempo.
is recommended to paint the ceiling latex paint spray gun in three layers.Each layer must be applied only after the previous one has dried.In no case can not be applied layer is not frozen or dried primer composition of the ink, because latex will fall ill and quickly peel off.As a result, you will have all the work is done again.
optimal time of creation of the first and third layers is considered to morning and evening when the room is well lit, but not blind to direct sunlight.It is not necessary to follow this recommendation, the main thing that was clearly visible all the defects of painting, and the angle of incidence of light is as close to a constant for a given room.
errors painting ceiling paint sprayer
But if you do make a mistake in painting the ceiling, you need to find out what they are associated.If you do not adhere to the technology of painting the ceiling latex paint, and she has drops, this indicates a lack of speed of movement of the gun nozzle.As we have said, to collect the excess paint with a sponge, and the top to make another layer of latex paint.If
came thick layer and the paint started peeling off, then you need to take such action: proshpaklevat places where any peeling, sanding them, and then re-apply a prime coating paint.Be sure to wait until the product is completely dry, and again to walk on the ceiling surface layer of paint to avoid the visibility of previous fixes.
If after painting the ceiling appeared on the surface of the grains or lumps, the reason for this lies in the marriage initially contaminated paint.To eliminate this disadvantage must be proshtukaturit entire ceiling surface with sandpaper.Take sandpaper medium and fine grits.After that your paint strain through cheesecloth and the ceiling apply another coat.
Thus, the ceiling painting with latex paint using a spray gun will not spoil your repair.You will forget about the dark bands, divorces and follow the boundaries of painting on the ceiling surface.In addition, you can achieve a perfectly uniform surface which is impossible when using a brush or roller.What to remember about the time spent on painting the ceiling paint roller.