As a rule, when it comes to the need to establish quality presentable face above his head in one or more rooms, the vast majority comes to mind plasterboard.And it is indeed a good option, given that the cost of the material called a high language does not turn.However, the price that construction organizations ask for the installation of such a structure, immediately negates the apparent benefit.Stop!Why not build it with your own hands?Moreover, it is not difficult.
- Ceilings plasterboard and their benefits
- Preliminary work
- Tools and equipment
- Room preparation
- technology finishing the ceiling plasterboard
- finishing - all at your fingertips
Ceilings plasterboard and their benefits
ceilings of plasterboard have weight advantages.First of all, it is possible to hide all the defects (unevenness, cracks) corresponding area.In addition, under the plasterboard ceiling convenient to hide communication (various
These ceilings will be a worthy functional decoration of each room - even the bathroom.The truth is in the latter case, you have to treat the material a special repellent.
paid to the preparation of its maximum attention because mistakes at this stage it may cost you dear: the lost time - this is only the smallest.
without a clear plan of action to start any repair is not necessary.Start with the project, discuss it with family and friends (with specific people who will be staying in the room, and even your mother or grandmother - absolutely ignorant in matters of building people, they can have their design preferences, which may be worthlisten).Decide on a number of levels - it is from this figure depends calculation material.Designate of the future structure of the ceiling, be sure to check the places where later will be lighting.
Tools and equipment
When installing GCR ceilings you will certainly be required:
- tin snips;
- building knife;
- saw for plasterboard;
- needle roller;
- screws, dowel-nails;
- and, of course, themselves GCR.
If mounting ceiling structure will be made in the already renovated room, then it is necessary to make furniture, equipment and so forth. - Because it is no secret that the plasterboard ceiling decoration involves a large amount of dust.Paul and all that should be closed is not possible to make a film.
technology finishing the ceiling plasterboard
Now that all the preliminary work is done, you can proceed directly to the installation.
The easiest way, of course, to mount odnourovneny ceiling.First of all, you need to make a layout for the entire guide structure being built - with the help of laser level, a distance of about 20 centimeters from the ceiling (and can be less - it all depends on the number of communications).Cope with all the perimeter of the room, they fixed dowels, keeping about half a step.
Then proceed to markup ceiling.Pencil scheduled parallel to the supporting rails - optimal distance between them should be a little more than half the length of the FCL.This is required in order to later in the gaps between the sheets can be smoothly push Termination mixture.By
obtained by marking lines on the metal-anchor wedges are fixed suspensions (in increments of 40 cm).
Horizontal frame is checked using a laser.You must now perform a markup for longitudinal profiles.Their fixation is done with the help of special crab.
When the frame is completely ready, you need to drag to place all wiring and fix it with tape on the rough ceiling to prevent it from dislodging or damage during operation.
Well, finally the time has come of the skin.The sheets should be pre-cut into the floor office knife or jigsaw (for curved bars).To work with GCR is not difficult - made on a sheet layout, held a knife to the line, took up the cut piece, it broke down.If all the preliminary manipulations you perform properly, drywall burst exactly at the specified location.The process is somewhat like working with glass.Jagged edges, inevitably formed in places of fracture should be leveled rasp or plane.
order to improve waterproofing properties of drywall constructions recommended each of the elements mounted primed before installing a special compound.
technology finishing the ceiling plasterboard involves fixing sheets to all (!) Of the profiles with screws on metal.Recommended step - 20 centimeters.The gap between the sheets in a couple of millimeters is required.
Attention!Caps screws utaplivat can not in any case!So that this does not happen by accident, it is best to use a screwdriver with depth stop screwing.
After the entire frame will be hidden under a new roof, you should carefully check the flatness of the surface obtained in all directions if necessary to correct flaws and cut holes for the lighting.
Think on this dusty work ends?And here and there!Ahead you will find plaster ceiling.It is carried out in several stages.The first step is to "close" the joints between the sheets.Remember, they are not enough to miss the mark - you have to stay confident that the putty composition does not fall out of them in a week or month.To subsequently lament about "deficiencies", experts recommend to "strengthen" seam used strips of reinforcing mesh or a special base paper.
What is the process of reinforcement?The joints are filled with a layer of putty, it is superimposed grid, followed by another layer means.The same treatment should be subject to the gaps left between the foresight to GCR and the wall.After drying, these areas should be treated fine sandpaper.
Do not leave without attention and place failed "screwed" screws - and should also be putty.If necessary, treat the entire ceiling putty.
completely dry surface progruntovyvayut special trains.
This plasterboard ceiling decoration is complete.
finishing - all at your fingertips
with prepared in this way ceiling can do as your heart desires - drywall can be subjected to wallpapering or use it as a base for adhesive ceiling, because the surface of the cardboard GCR is clearly a solid basisfor any adhesive.
But more often, finishing finishing plasterboard ceiling - is painting.For these purposes may be used in almost any medium.If your choice fell on the water-based paint, it is highly recommend to cover the ceiling of a thin layer of putty.