Time does not stand still, technology and science, too.Engineered to take something so invents.With the advent of PVC films in the hands of designers turned out material, which provides a wide field of activity and allows the development of all translate into reality.In principle, such an effect in the design of ceilings other materials can not be achieved.Technology installation of a two-level stretch ceiling is not so complicated.All need somewhere 3-4 hours.Besides, you will appreciate the absence of fillers, mortar, paint and debris.
- features two-level stretch ceilings
- sketch two-level stretch ceiling
- Technical requirements for the installation of two-level structure
- mounting frame for a two-level ceiling
- means of fixing stretched canvas
features two-level stretch ceilings
Modernsuspended ceiling is a fabric made of PVC film, which is attached to the profile for the frame.After installation, the web becomes a smoot
Installation of suspended ceilings, single-level and two-level, even the most aesthetically pleasing and convenient mode of decoration.These ceilings are especially beautiful in large rooms with high walls.As used cloth fabric material or vinyl, the surface of the ceiling may have a different structure - glossy or matte.
There are the advantages of this type of finish:
- Getting a flat ceiling surface at low labor costs.The ceiling in apartments is often uneven, has great differences in height.To get rid of this shortcoming in the traditional way, that is with the help of plaster, need a lot of time and effort.Labour costs to obtain a flat surface using the technology of stretch ceilings are low.In addition, the ceilings have a distinct advantage, as the speed of installation.
- external appeal.It is unlikely that you will be able to dispute the fact that the finish looks very nice.In addition, the range of suspended ceiling panels is quite wide and varied and you can choose a variety of options.
- protection from water.Unfortunately, sometimes there are accidents in apartment buildings, leaving apartments that are located on the riser below, are flooded.But when you install two-level stretch ceilings with their hands can not worry about the safety of their repair.Panels water simply can not miss.To eliminate the accident will only need to release the water, and to eliminate sagging of the cloth using a heat gun.
Of course, there is stretch ceiling and disadvantages:
- relative fragility of the cloth.If you will touch cover some sharp object on the surface of the damage occur - scratch or puncture.
- Panels PVC film should not be set in suburban seasonal residence buildings that are not heated in the winter, since the film under the influence of low temperature will be destroyed.However, in this case, you can use a cloth fabric that can withstand cold temperatures well, so finishing unheated buildings need to select this option.
- high price.Stretch ceilings will cost you dearly, especially duplex.But the high price of two-level stretch ceilings are more than offset by a long useful life.And not to pay for the installation of the web installers, you can perform all the work by hand.
sketch two-level stretch ceiling
That ceilings are suitable for the most sophisticated two-level ceilings, which have an unusual configuration.Since the film is a PVC plastic and flexible, it makes it easy to realize any design idea.
developing the project two-level stretch ceiling, you should consider several factors: the desired aesthetic result and functional feasibility.With the help of a two-tier structure, you can hide any irregularities ceilings and effectively equip lighting.It is not necessary to reset the account and the possibility of zoning space.It uses a combination of different textures, colors and shapes of the web tension, which not only divides the room into separate zones, but also increases its optically.
Choice of color combinations and shapes in the regeneration of a two-level stretch ceiling is necessary to condition the general concept of the interior.So, in rooms with concise decisions on color and interior layout will be redundant arrangement of the ceiling structure of complex shape with fancy curls, much brighter than the other elements of an interior color combinations.
Regarding the two-level stretch ceilings with photo printing you need to say the following.Undoubtedly, these effects look impressive and unusual in its essence.But too much emphasis on the ceiling surface (the unusual shape, but still bright picture) is justified only in the spacious rooms with high ceilings.
But if you decide to take this step, it is necessary to take into account the property of glossy cloth "blikovat" and the reflective surface.Images from the effect of a starry sky, patterns and optvolokna usually inserted to the lower level of the tension of the cloth.
Technical requirements for the installation of two-level structure
main elements of a two-tier system are: plastic or aluminum Frames of wall, ceiling, or the type of connection that is required for fixing the film directly to the ceiling or duct;web, which consists of several pieces of film, which are welded to each other, and is bordered by flexible harpoon perimeter;inlay that covers the mounting slot in the 4 mm between the wall and the canvas.
As a rule, two-level installation of suspended ceilings produced at the last stage of repair, when fully completed all the dusty work.For the installation procedure are put forward such claims:
- profile made to install on concrete, brick, plasterboard, wood, aluminum, tile, or plaster.We can not allow the old ceiling crumbled cover - it must first be cleaned and primed.
- two-level stretch ceiling installation can be performed in the room with furniture, appliances and other items.But remember that the distance from the ceiling to the new top of the enclosure near the wall should be more than 70 centimeters.
- Before you start, it is recommended to develop a wiring diagram and communication in places where it is found stretched canvas.
- two-level quality installation of a stretch ceiling is possible only under certain thermal conditions of electrical equipment, which is integrated into a new ceiling: instruments must be heated slightly.The same applies to the ventilation, spotlights, HVAC equipment, alarm systems and fire fighting.
mounting frame for a two-level ceiling
Before you make a two-level stretch ceiling is necessary to make a frame made of metal profiles, which are designed for drywall construction.The plane construction should be strictly horizontal.A laser or water level necessary in each corner mark tags.From these labels is conducted using a continuous line otbivochnogo cord around the perimeter of the room.
By allotted line attach a U-shaped profile with the help of punch and dowels.The same profile must be installed on the ceiling and to a paved markup.Form box is straight and curved.To consolidate the profile of a curve, it is necessary to make an incision with scissors for metal, adhering interval of 3-4 centimeters, in such a way that you can bend it to the desired curvature.
For fixed on the ceiling, attach the profile omitting made of profile sections.The lower edge of the drop symbology must be a wall profile at the same horizontal level.Together they will form the underside of the entire two-tier structure.Interval fixture is 25-30 centimeters.
of two segments of the profile and U-profiles assemble box, twisting screws on the metal so as to achieve a design that looks like a tube of rectangular cross section.This structure must be attached to the pre-installed standpipe.Follow all the mounting screws on the profile of the work of the "ê" using screwdriver.
profile mounted to the wall box, attach the wide bearing profile.Strict compliance with horizontal and vertical sure, you can check the angles using a level.In this way, and collect the whole frame around the perimeter of the room.By then screw the duct baguette for tensioning the canvas.At cooling stretch ceiling film is much tensioned, so the design must be different boxes high strength, designed for load and withstand tension of PVC film.
next stage of the two-level installation of suspended ceilings with their hands is laying the wiring necessary for the arrangement of lights and trim frame plasterboard.Cut sheets of the desired size and place in the box, fastening Drywall screws.After installing all the elements necessary to strengthen the angles using perforated corner, which is usually mounted on a plaster putty.
all recesses of screws and joints also need to putty.Box after hardening putty is necessary to grind the special grinding grater.Mark the placement of lamps and built-in drill holes with the appropriate nozzle "crown", then ogruntuyte surface boxes and paste over wallpaper or apply the paint.In this way, the ceiling of the lower level is performed.Installation of suspended ceilings in the execution of a lot easier.
means of fixing stretched canvas
Thus, installation of stretch fabrics require such equipment and tools: hammer to fix the guide rail to the wall, the heat gun with a gas tank for heating the cloth and its installation, screwdriver, level for creating markup (best usedlaser, but if there is no such, it is possible and hydraulic), ladder for easy working at heights, spatulas and special blades for tensioning and securing PVC film.
stretched canvas itself should be secured to the established profiles shtapikovym, harpoon or wedge method.The most common way to mount a harpoon: the edges of the film is welded on the machine harpoon - a special hook, which is necessary for fixing the profile and pulling the fabric.
ceiling, equipped with this technology can be easily removed and re-set in place during repairs or flooding, unlike shtapikovoy and wedge.This fabric is recommended for a special carve out very precisely: the best solution if it is less than 7% of the area covered by the ceiling, as shown in the video of the two-level mounting tension ceiling.
Wedge method involves mounting the web that has the larger area of the ceiling, so the film is carefully measured and then cut the excess material stretch.Shtapikovy method is similar to the generator.However, the film should be attached to the profile with a special tape that provides excellent tension.
Enhanced install two-level stretch ceiling needs to be necessarily accurate drawing with dimensions.The cloth is cut out and sewn only after measuring the room!Consolidating the suspended ceiling to drywall box or frame, it is necessary to ensure the reliability of fixing moldings and high density mounted to fit the profile of a two-tier system.This will determine the type and duration of operation of the new ceiling.
Before installing the duplex suspended ceiling, painting heat the hair dryer or heat gun to plus 60 degrees, so that it becomes elastic.When installing such a structure the room temperature should be not less than plus 40 degrees Celsius.The film is mounted first at one corner is fixed in the opposite and then - at the remaining corners.The longest and most difficult last corner is fixed.
canvas then need to be fixed in the profiles in steps of 8 centimeters: spatula fasten tape around baguette, pulling it evenly.Cut fabric remnants, if you chose a wedge or shtapikovuyu technology.Spread all stripes and folds, construction heating film hairdryer.Upon cooling to ambient temperature of the room, she smoothed, and the ceiling surface becomes perfectly flat and smooth.
Flexible masking tape close the technological gap.Cut a hole in the fabric of fixtures.To protect it from the heat lamp edge okleyte thermal insulation ring.If the light is behind stretched canvas, it is uniformly illuminate the entire area.But lamp without concern of film.
As you can see, technology is a two-level ceiling mounting tension in his house available to everyone.Besides, it is such ceilings are functional, volumetric and elitist.With small investment of time and effort you will get a great set of overhead, which will close all the defects and roughness of the old ceiling.In addition, such a construction is not afraid of no water, if you accidentally flood the neighbors above.