for pumping clean water, which has no particulate impurities, used ordinary pumps.Their construction is in its characteristics likely to fail if it fall substances other than water.Because there are devices such as sewage pumps for dirty water, which are used for removing wastes from private buildings and industrial buildings.
- characteristics different from conventional sewage pumps
- Description submersible pump design fecal
- Description submersible pump design fecal
- Description outer structure
- fecal pump sewage pumps with macerator and without chopper
- How to choose fecal pump
- Overview manufacturers sewage pumps
characteristics different from the conventional sewage pumps
most important difference from the conventional sewage pumps is that the first mechanism is not able to pump any liquid still than pure water.Pump sewage is able to operate even if the effluent contains stones or other solid elements.In this case, they wi
sewage pumps for toilet and sanitary sewer, which do not fall solids has no setchatogo filtra, because in this case it is not needed.Diametr Kensington input determines the largest number of stokov which passes through the equipment.In most cases, its size is 35 mm.Most models have a float switch that provides automatic operation of the mechanism.There
sewage pumps with macerator - shredder, and without it.They also differ in the temperature of the received water to those who take the hot flow and cold.How to install and some design features are divided into the following types of mechanisms:
- nasosy pogruzhnye;
- nasosy polupogruzhnye;
- nasosy external or superficial.
Description submersible pump design fecal
This equipment is ideal for pumping liquid from flooded basements to drain storm water and for watering plants in the garden.But its main purpose - the output of liquids from septic tanks and other treatment facilities.The body and all important working parts of the equipment are made of chemical resistant materials, as their mission - to work in a chemically aggressive environment.As the base material used cast iron or stainless steel.
pump is running in automatic mode, because it has a float mechanism.Includes a submersible structure at the bottom of the tank from which you want to pump the liquid.Installation is made in the following order:
- tube attached at the bottom of the container from which to pump liquid;
- established guides for lowering pumping equipment;
- pump connected chain of metal or wire lowering equipment at the bottom;
- as filling the tank with liquid, the pump down on a rope to the bottom and worn on the pipe, under the weight of the equipment it is fixed on it.
This system makes it easy to get equipment for repair or check its performance.The design of the submersible pump is one of the most popular among users who need equipment to give.Ideal for pump such a fecal cesspools.The average power of 40 kW models, they pumped liquid fast enough and raise it to a height of 20 m, the approximate amount per hour - 400 m3.
Description submersible pump design fecal
submersible pump, different from the first modification described, the possibility of installing them - pump part is immersed in the liquid, and the engine remains on the surface.To this end, a special pump attached float on which is mounted a device to impart the desired position in the fluid during operation.
submersible pump has a smaller diameter wire channels, because there are some restrictions on the allowable size of particulate matter contained in the effluent, it is determined by the characteristics of the specific model.Another feature - the obligatory presence of a shredder, which grinds solids.For domestic use characteristics semisubmersible units meet the necessary parameters.This is indicated in the semi-submersible pump fecal consumer reviews.Indicating that the equipment is optimally suited for low-rise buildings with private cesspool.
Description outer structure fecal pump
Surface pumps are also referred to as external devices.They are placed on the edge of the container to drain to the liquid only the immersed tube connected to the equipment.The most significant advantage of this pump - its portability, which allows you to quickly carry and install it elsewhere.It is also noteworthy that this fecal pump to buy profitable, due to the lower price.Among minus the number of lower power in comparison with submersible or semi-submersible device.Also, it does not figure high bandwidth allowed size of solid particles not more than 5 mm.
housing surface equipment does not have a waterproof coating, which is why he is not permanently installed.The device goes down when struck by liquids at low temperatures located inside the water freezes - all of these factors lead to a breakdown.Permanent installation is only permitted in closed, dry and warm rooms, otherwise it is necessary to limit the period of use, move the pump, if operating conditions are changed to unsuitable.To avoid permanent dismantling if you can not install it in the room, settling near the facility for installation of waste containers.
sewage pumps with macerator and without chopper
1. Equipment for hot Photo:
- nasosy fekalnye bez izmelchitelya used for the organization of drainage runoff from household appliances and plumbing, running hot water.Most often they are used for redevelopment, where bathroom and kitchen are transported to another place, and sewage system remains in the old location.Not equipped with a chopper pump normally operates at temperatures up to 90 ° C Drainage;
- device for hot water, equipped with a chopper, operating at temperatures up to 95 ° C, all the solid wastes are crushed.Allowed to install the pump for any kind of equipment and plumbing.
2. The equipment for cold flow:
- nasos for holodnogo stoka bez izmelchitelya for connecting to it at the same time several types of equipment.Limit temperature is 40 ° C.It is necessary to monitor the runoff, as does the absence of a shredder pump sensitive to getting into the solid waste;
- nasos for holodnogo stoka with izmelchitelem most often used for equipment toilets.This device operates as follows: collects runoff, as he crushed the collection, and then sends it down the drain.To connect the adapter is used, continuous operation is possible in the case of discharge temperature not exceeding 40 ° C.The advantage of such a pump toilet equipment that is not necessary to install a large cross section of the pipe, as the stock is thoroughly ground.Demonstrates work like fecal pump video at the end.
How to choose fecal pump
necessary to consider some nuances to choose the right fecal pump.Characteristics that are taken into account when choosing:
- working depth for equipment;
- distance from the intake to the point at which the stock is transported;
- desired performance metric - volume of liquid to be pumped, pump speed, which is measured m3 / h or l / min;
- size encountered solids in the effluent;
- size of the circumference of the pipe stochnoy conducting septik in water;
- the machine's environment.
When calculating power and determination vysoty podema stoka to add depth limit pogruzheniya shlanga in metrah length, measured from the place of pumping water to the point of delivery.When this length is divided into 10 such as 1 m length in the vertical plane is 10 m in length in the horizontal plane.
Review sewage pumps manufacturers
1. Pumps faecal Pedrollo.
used for pumping fluid to the presence of heavy dirt and feces.Most of the models used for life and how drainage equipment.Distinguish modifications for these and other purposes by the presence in the bottom of the grid bounding the largest allowable size of the solid particles.Submersible pumps do not have a grid, sewage as it equipped.The product range of this manufacturer are the two major series - VXm and MC / MCm, where MC has a capacity of 380, and MCm - 220V.
VXm Series has a smaller capacity and performance, and therefore ideal for everyday use in country houses and single-storey buildings seasonal destination.In larger buildings and large areas is reasonable to use pumps MCm, the MC series is used on an industrial scale.Specifications Model:
- voltage - from 220 to 380 B;
- highest rate oporozhneniya From dna - from 40 to 55 mm;
- highest rate of head - from 15 to 66 m3 / h;
- highest rate of depth - from 8.4 to 22 m;
- moschnost - from 600 to 2200 W;
- razmerom allowable particulate matter - from 35 to 50 mm;
- diametr patrubka output - from 1.5 to 2.5 dyuymov.
2. Fecal pumps Grundfos SEG.
sewage pumps Grundfos SEG is equipped with a chopper and is suitable for use with a sink, ground water, household waste, it is connected to the sanitary units and pumps a fluid with a high level of pollution and the presence of solids.Most often used for connection to a drain provided pumping fluid through the pipes of considerable extent, but a small size in diameter - 40 mm.General characteristics of the equipment:
- material production - iron;
- impeller has a regulatory system;
- relays to protect the motor from overheating in the amount of two pieces;
- highest rate of starts per hour - 30;
- highest rate of depth - 10 meters;
- maximum water temperature - 40 ° C.
3. Fecal pumps JEELEX.
JEELEX company produces two series of pumps - Fekalnik and Drenazhnik.As the name implies, one designed for water without solids, while the latter are suitable for polluted wastewater.The largest size allowable inclusions Series Fekalnik is 35 mm.A series of devices represented by fecal submersible pumps with electric power type used for everyday life.General characteristics:
- allowable size of solids - 35 mm;
- performance - from 150 to 255 l / min;
- greatest exponent depth - from 6 to 11 m;
- the float switch.
4. Sewage pumps Vortex.
Products brand Vortex is used for pumping sewage contamination strong fibrous inclusions.It is used for domestic purposes, it has a system of protection of the motor from overheating.General characteristics of the equipment:
- allowable number of switching - 20 per hour;
- capacity - from 450 to 1500 W;
- lifting depth - from 9 to 18 m;
- liquid supply - from 16 to 24 m3 / h;
- allowable size of solids - from 15 to 42 mm;
- liquid temperature - up to 40 ° C.
5. Fecal pumps WQD.
equipment submersible drainage and fecal.The impeller is made of cast iron, gated housing is also made of cast iron.Thanks to this device provides the pressure at great depth, with a low power rating.The pump is installed permanently and works in automatic mode.General characteristics:
- capacity - from 0.55 to 1.5 kW;
- pressure - from 250 to 400 l / min;
- immersion depth - 18 m.